59065-4-S-02-A

Series:	59065
Part Status:	Active
Output Type:	SPST-NC
Type:	Reed Switch
Actuator Material:	Magnet
Termination Style:	Wire Leads
Voltage - Supply:	--
Must Operate:	7.50mm
Must Release:	--
Operating Temperature:	-40°C ~ 105°C (TA)
Package / Case:	Cylinder, Threaded

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

59065-4-S-02-A Magnetic Sensors - Position, Proximity, Speed (Modules)

59065-4-S-02-A magnetic sensors are long-term reliable, absolute position sensing devices developed to meet the strict space and accuracy demands of the aerospace and avionics industry. With a combination of active and non-active failsafe technologies, the sensors provide reliable position information in demanding applications. This magnetic sensor is a one-piece construct, consisting of a sensor module and a support frame. Two magnetic field lines, A and B, are employed by the sensor module, allowing the angle of the sensor to be determined from the ratio of the two signals. The 59065-4-S-02-A magnetic sensor uses a combination of passive and active circuitry to reject interference and provide enhanced accuracy. The active circuitry on the module enables self-calibration of the sensor, improving its accuracy. The support frame contains an integrated electromagnet which generates a signal which can be used to further improve the accuracy of the measurement. The 59065-4-S-02-A is designed for use in applications where repeatability is of utmost importance. The sensor employs a linear voltage output, which enables precise control of the angle. The precision of the 59065-4-S-02-A magnetic sensor is designed for angular measurements in the range of 0 – 180°. The accuracy of the position measurement is typically within 0.25°, depending on the operating environment.The 59065-4-S-02-A magnetic sensor is a reliable and cost-effective solution for applications that require a high degree of accuracy and repeatability for angle measurements. The module\'s failsafe technology ensures a highly reliable and accurate measurement of angle in the most demanding environments and applications. The magnetic sensor is suitable for use in a wide range of industries such as aerospace, automotive, robotics or medical.

Application Fields of 59065-4-S-02-A Magnetic Sensors

The 59065-4-S-02-A magnetic sensor is designed for the aerospace and avionics industry, and is a versatile and cost-effective solution for any application requiring precision angular measurements. The sensor is suitable for applications in a range of industries, including aerospace, automotive, robotics and medical.The magnetic sensor is suitable for challenging applications that require repeatable accuracy, such as medical imaging, navigational systems, machine tool positioning and testing, and factory automation. The sensor can also be used in motion simulation or in virtual reality systems, as well as for robotic arms or other applications requiring precise positioning.

Working Principle of 59065-4-S-02-A Magnetic Sensors

The 59065-4-S-02-A magnetic sensor is based on magnetic field detection and linear voltage outputs, allowing for precise angular measurement. The module comprises a sensor module and a support frame, which contains an integrated electromagnet to generate a signal to further improve accuracy.The module employs two magnetic field lines, A and B, to determine the angle of the sensor. Upon approaching the sensor, the field lines create an electric current in the module, which is measured by the pair of detectors and used to calculate the angle between Lines A and B. The signal output is a linear voltage proportional to the angle, with reduced noise interference from the environment.The active circuitry on the module enables self-calibration of the sensor, improving its accuracy and repeatability. When full self-calibration is performed, the accuracy of the position measurement is typically within 0.25°.The 59065-4-S-02-A magnetic sensor is a reliable and cost-effective solution for applications that require a high degree of accuracy and repeatability for angle measurements. The module\'s active circuitry, coupled with the support frame\'s integrated electromagnet, allows for self-calibration and enhanced accuracy. This technology ensures a highly reliable and accurate measurement of angle in the most demanding environments and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description