597D108X9004R2T Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors, also known as tantalum electrolytic capacitors, are a special type of capacitors made from the metal tantalum. They were first developed in the 1950s and have been used in many applications since. A tantalum capacitor consists of tantalum powder, a dielectric oxide film, and two metallic electrodes. The dielectric oxide film, typically an oxide of tantalum or niobium, provides a high capacitance with a low equivalent series resistance (ESR). The electrodes provide the necessary electrical connection.

The 597D108X9004R2T is a type of tantalum capacitor that is often used in analog and digital circuit designs. It has a capacitance of 10 μF, a voltage rating of 10 V, and a maximum ESR of 0.15 Ω at 10 kHz. The component is available in two package types, the SMD 0603 and the axial-leaded version, and is widely used in consumer and industrial applications.

One of the most common uses for the 597D108X9004R2T is in decoupling applications, where it serves to prevent current flow between two sections of a circuit. It is also used as a filter capacitor, where it is used to block high frequency interference from entering a system. In addition, the 597D108X9004R2T is often used in applications which require a long life or high reliability capacitor, such as automobiles, medical equipment, and consumer electronics.

The principle of operation of a tantalum capacitor is based on the storage of electrical energy in an electric field between two layers of material. The dielectric oxide film serves as the barrier between the two layers, and the voltage across the capacitor is proportional to the charge stored. The capacitor will discharge when the voltage across it is reduced, and it will charge up when the voltage is increased.

Another important characteristic of the 597D108X9004R2T is its low ESR. This allows it to be used in applications which require tight voltage regulation, such as RFID tags and instrumentation amplifiers. Its low ESR also makes it particularly suitable for use in high frequency switch-mode power supply (SMPS) circuits.

Aside from its use in analog and digital circuitry, the 597D108X9004R2T can also be used as an energy storage device. Its ability to hold a large charge enables it to be used in applications such as pulse power supplies, where a short burst of high voltage is required. It is also suitable for use in energy scavenging applications, where energy is extracted from sources such as radio waves and converted into electrical energy.

In summary, the 597D108X9004R2T is a versatile type of tantalum capacitor that is suitable for use in many types of circuit designs. It is available in two package types, has a low ESR, and can hold a large charge. Its reliability and long life make it a popular choice for a wide range of consumer and industrial applications.

The specific data is subject to PDF, and the above content is for reference