Allicdata Part #: | 800-2104-ND |
Manufacturer Part#: |
5V2305PGGI |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | IDT, Integrated Device Technology Inc |
Short Description: | IC CLK BUFFER 1:5 200MHZ 16TSSOP |
More Detail: | Clock Fanout Buffer (Distribution) IC 1:5 200MHz 1... |
DataSheet: | 5V2305PGGI Datasheet/PDF |
Quantity: | 287 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Type: | Fanout Buffer (Distribution) |
Number of Circuits: | 1 |
Ratio - Input:Output: | 1:5 |
Differential - Input:Output: | No/No |
Input: | LVTTL |
Output: | LVTTL |
Frequency - Max: | 200MHz |
Voltage - Supply: | 2.3 V ~ 3.6 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 16-TSSOP (0.173", 4.40mm Width) |
Supplier Device Package: | 16-TSSOP |
Base Part Number: | IDT5V2305 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
clock/Timing - Clock Buffers, Drivers
The 5V2305PGGI are clock and timing power management products from Texas Instruments. They are used in a variety of applications such as communications, computing, consumer electronics and medical devices.
5V2305PGGI are also referred to as "clock buffers, drivers". They are ideal for applications requiring low power consumption and cycles. They have a wide variety of features such as a 3V/5V tolerant, low voltage operation, low skew and low output current draw.
A clock buffer is a type of digital logic device which copies a digital signal that has been generated by a master clock, into a lower voltage version. It takes a clock signal that is generated by the master clock, and passes it through a buffer, driver, or other interface to create a reduced voltage replication of that clock signal.
Clock buffers usually have multiple outputs, such as two, three, or four. The outputs are usually differential, meaning that each output (in, for example, a two-output clock buffer) will be a positive signal, and an inverted signal of the same frequency. The outputs from these buffers will usually always be low power with low noise, since the outputs are buffered, which means the signal does not undergo any logic changes.
A driver is a type of logic device that takes the signal from a clock buffer and converts it into a low voltage, low current signal that is suitable for use. It may take multiple clock signals and create a single signal output or it may take a single signal and convert it into multiple lower voltage/current signals.
5V2305PGGI offer the following features:
- 3V to 5V compatible tolerant
- Low voltage operation
- Low skew
- Low output current draw
- Clock synthesis capabilities
- Partial cycle trips for easier device synchronization
- Power savings mode when the output is not in use
5V2305PGGI are suitable for a variety of applications, such as communications, consumer electronics, medical devices, and computing. They are ideal for applications requiring low power consumption and cycles.
In communications applications, 5V2305PGGI are used to establish desired output frequencies by dividing the clock signal and synchronizing the rhythms of computers and other electronic devices, as well as provide isolation between different clock domains. They can also be used in consumer electronics applications, such as digital televisions, in order to achieve low jitter, low noise, and improved signal integrity.
In medical applications, the 5V2305PGGI is used to create low-power, low-skew clock signals for systems requiring precise timing. The low-power design is beneficial in medical applications where power conservation is important, such as portable monitoring or medical instruments.
The 5V2305PGGI can also be used in computing applications, such as servers and desktops. Here, the clock buffers and drivers are essential for proper timing of data transfers, synchronization between different system components, and regulation of power. The low power requirements of 5V2305PGGI make them a cost effective solution for computing applications.
Overall, 5V2305PGGI are essential pieces of technology for a variety of applications. They can be used in communications, consumer electronics, medical devices, and computing in order to ensure proper signal transmission, low power consumption, and precise timing.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
5V2305NRGI8 | IDT, Integra... | -- | 1000 | IC CLK BUF 1:5 200MHZ 16V... |
5V2305PGGI8 | IDT, Integra... | -- | 1000 | IC CLK BUFFER 1:5 200MHZ ... |
5V2310PGGI8 | IDT, Integra... | -- | 1000 | IC CLK BUF 1:10 200MHZ 24... |
5V2305NRGI | IDT, Integra... | -- | 130 | IC CLK BUF 1:5 200MHZ 16V... |
5V2305PGGI | IDT, Integra... | -- | 287 | IC CLK BUFFER 1:5 200MHZ ... |
5V2310PGGI | IDT, Integra... | -- | 114 | IC CLK BUF 1:10 200MHZ 24... |
5V2310PGG | IDT, Integra... | 1.88 $ | 1000 | IC CLK BUF 1:10 200MHZ 24... |
5V2310PGG8 | IDT, Integra... | 1.88 $ | 1000 | IC CLK BUF 1:10 200MHZ 24... |
IC CLOCK MANANGEMENTClock IC
IC CLOCK BUFFER 32VFQFPNClock IC
IC CLK BUFFER 2:4 13.4MHZ 24QFNClock Fan...
IC CLOCK BUFFER MUX 3:11 48TQFNClock Fan...
IC CLK BUFFER 1:10 100MHZ 20QSOPClock Fa...
IC CLK BUFFER 1:6 100MHZ 16TSSOPClock Fa...