6.3X25-2-12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 6.3X25-2-12 fuse is a specialty component in the electrical category. It is often used to protect sensitive circuits from high voltage or overcurrent. Fuses are designed to open a circuit when the flow of electricity reaches a predetermined level as measured in volts or amps, thus protecting the circuit from further damage.

The 6.3X25-2-12 fuse consists of two parts: a base and a fuse element. The base is made of high-temperature-resistant heat-resistant material such as glass or ceramic, while the fuse element is made of copper wire. The base is connected to the circuit via its terminals, and the fuse element is connected between these terminals. When the current flowing through the circuit exceeds the predetermined level, the wire element melts, breaking the circuit.

The 6.3X25-2-12 fuse has a rated operating voltage of 250 volts, while the nominal current rating is 12 amperes. It has a hold current of 7.6 amperes and a breaking current of 17 amperes. The time delay of the fuse is 4 minutes. It also has a maximum tolerance of ±20%.

The 6.3X25-2-12 fuse is most suitable for circuit protection in electronic equipment, motors, pumps, transformers, and other related electrical devices. It can be used to protect against short circuits, overloads, and other potentially hazardous conditions. It also offers a degree of protection against fire and is UL listed.

In the event of an overload or short circuit, the 6.3X25-2-12 fuse is designed to open the circuit to prevent further damage. This is done by melting the fuse element, interrupting the electric current and ensuring the electrical device or circuit is not damaged. Once the circuit is opened, the circuit must be replaced or repaired before it can be used again.

The 6.3X25-2-12 fuse is not suitable for all applications, as the voltage and current ratings must be matched for each particular device or circuit. It is also not suitable for application where low inrush current is required, for example in motors or inrush minimizing thermal fuse applications. Finally, the voltage rating must be checked to make sure it is compatible with the voltage of the equipment it is protecting.

In summary, the 6.3X25-2-12 fuse is a specialty component in the electrical category, commonly used for the protection of circuits from high voltage or overcurrent. It has two parts: a base and a fuse element, with a rated voltage of 250 volts and a current rating of 12 amperes. The fuse is ideal for protecting electronic equipment, transformers, pumps, and motors, but its voltage rating and inrush current requirements should be taken into account before application.

The specific data is subject to PDF, and the above content is for reference