Backplane Connectors - Contacts

The 608489070001049 or commonly known as 60849 is a type of backplane connector. This type of contact is designed to make electrical connections, while also providing mechanical support, between a backplane and a printed board circuit. Backplane connectors are especially useful when it comes to the building of multiple system units that need to transfer data between them.

The 60849 connectors are designed to fit into a systematic framework with the use of pins, sockets or press-fit contacts. They typically feature two parts: the mating connectors and the backplane receptacle. The mating connector consists of the tips, or contacts, while the receptacle is made up of rows and columns filled with contact holes. When put together, the connectors and receptacles form a structure of contacts on the substrate of the system.

The 60849 system is well-suited for the transfer of digital data. It allows a high density of connections between a printed board and a backplane. This type of connector is also able to support applications which require multiple parallel signal paths with a standard set of contacts. The ability to create multiple signal paths can provide tremendous flexibility for a system\'s design.

The 60849 system creates an electrical connection between the backplane and the printed board circuit. It does this by making contact between its pins and the contact pins on the board. Graphics, video, and other digital information signals, can pass through the contacts, eventually connecting to the right destination. This enables digital data to be transmitted from one place to another, essentially forming the basis of any kind of electronic device.

The 60849 system also applies a mechanical strain relief element, which assists in protecting the contacts from physical damage, possible failure, or electrical shorting. This strain relief feature uses a compression spring to keep the contacts securely located, and helps to reduce risk of electrical interference between contacts. In addition, an insulation clamp may also be used to protect against EMI (electromagnetic interference).

In summary, the 60849 system is a type of backplane connector designed especially for the transmission of digital data signals. Its architecture consists of mating connectors and backplane receptacle, designed to form a structure of contacts on the system’s substrate. It also features a mechanical strain relief function that aids in protecting the contacts from possible damage, failure, and electrical shorting. Additionally, the use of insulation clamps can also protect against EMI interference. This system is useful in applications where multiple parallel signal paths are needed, and especially in the building of multiple system units that need to transfer data between them.