60S6-TP

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	6A
Voltage - Forward (Vf) (Max) @ If:	1V @ 6A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	5µA @ 600V
Capacitance @ Vr, F:	150pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-201AD, Axial
Supplier Device Package:	DO-201AD
Operating Temperature - Junction:	-55°C ~ 150°C
Base Part Number:	60S6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 60S6-TP is a single rectifier diode, also known as a single-phase bridge rectifier, which is used to convert alternating current (AC) to direct current (DC). It consists of four diodes connected in a “Bridge” configuration, which allows the rectifier diode to conduct current in both directions, hence the name. The 60S6-TP is commonly used in many applications, such as automotive and home electronics and appliances, solar systems, electronic circuits, and more.The 60S6-TP has a high continuous forward current rating of up to 6A, while the reverse power rating is 2.5W. It has a peak reverse voltage rating of 100V, as well as a junction temperature rating of -55°C to +125°C. The 60S6-TP diode can withstand a surge current of up to 800A for 8.3ms.The 60S6-TP works by allowing current to flow in only one direction. When the input voltage is applied to the bridge rectifier, it will produce two different voltages for each cycle depending on the direction of the current. This is known as the “Half Wave Rectification” process. During the positive half-cycle, the anode of the diode will be at a higher voltage than the cathode and will allow current to flow through it. During the negative half-cycle, the anode will be at a lower voltage than the cathode and will not allow current to flow.The most common application of the 60S6-TP is motor control and other AC/DC converters. They are often used in single-phase home appliances, such as vacuum cleaners, radios, and power supplies. The 60S6-TP can also be used in switching circuits, however, the higher reverse voltages present in this application may cause the diode to fail. Therefore, it is important to ensure that the reverse voltage is not too high for the device.In addition to these applications, the 60S6-TP can also be used in a variety of other applications. These include solar panel Charge Controllers, voltage regulators, breathalyzer sensors, and electrostatic printers. As the 60S6-TP has a high forward current rating, it is well suited for these applications.The 60S6-TP is a widely used, single rectifier diode. It is used in many applications where a reliable and efficient conversion of AC to DC is needed. Its high continuous forward current rating and surge current capability make it a great choice for many applications. Its wide temperature range and its ability to withstand high reverse voltages make it suitable for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description