Allicdata Part #: | 679625-8-ND |
Manufacturer Part#: |
679625-8 |
Price: | $ 230.94 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | SHEAR HOLDER FRONT |
More Detail: | N/A |
DataSheet: | 679625-8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 209.94700 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators, and Presses are essential tools in the field of industrial wiring. Crimpers are typically used to crimp wires, fasten terminals, and secure ends of cables. Applicators are specially designed to attach insulation or protective sheaths around wires, and presses are highly effective in annealing and forming wire or other materials. This article is devoted to the application field and working principle of a 679626-8 press.
The 679626-8 is a type of hydraulic press designed for the pressing of wires, terminals and cables. It is typically used in the production of wiring systems, electrical components, or other sorts of connectors which need to be fitted into place along with the wiring system. The 679626-8 press can also be used for the manufacture of plumbing components and fittings. The press is capable of applying an adjustable, high-force pressure to a single item and allows for even distribution of that pressure. The 679626-8 press also comes with a safety device that is designed to shut off the press after a set amount of pressing time.
To use the 679626-8 press, the operator should pre-condition the wires that are being worked on. The operator should then secure the wires or terminals within the jaws of the press and slowly begin to apply the pressure. The amount of pressure should be controlled according to the demands of the job. The operator may also make use of the safety device if necessary.
Once the pressing is complete, the operator should inspect the wires or terminals for any signs of damage or deformation. The screws and nuts of the press should also be inspected for any signs of wear or tear. If these components are found to be out of order, they should be replaced or fixed right away.
The 679626-8 press is a unique tool that is specially designed to produce quality wiring systems, electrical components, and fitting that can be used in a variety of applications. Its powerful and adjustable force-applying capabilities make it an essential tool for the production of many kinds of connectors and wiring systems. In addition to its useful application field, the press is also extremely easy to use and comes with a safety device that helps ensure the safety of the operator.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
679685-1 | TE Connectiv... | 598.89 $ | 1000 | CAP RAM MACHINED |
67968-002LF | Amphenol FCI | 0.0 $ | 1000 | CONN MOD JACK 6P6C R/A UN... |
67968-002 | Amphenol FCI | 0.0 $ | 1000 | CONN MOD JACK 6P6C R/A UN... |
67968-001 | Amphenol FCI | 0.0 $ | 1000 | CONN MOD JACK 6P4C R/A UN... |
679625-8 | TE Connectiv... | 230.94 $ | 1000 | SHEAR HOLDER FRONT |
2-679625-1 | TE Connectiv... | 243.84 $ | 1000 | SHEAR HOLDER FRONT |
679625-1 | TE Connectiv... | 251.35 $ | 1000 | SHEAR HOLDER-FRONT |
679625-2 | TE Connectiv... | 255.65 $ | 1000 | SHEAR HOLDER-FRONT |
679631-1 | TE Connectiv... | 82.57 $ | 1000 | SPACER |
679666-1 | TE Connectiv... | 85.76 $ | 1000 | GUARD |
679625-4 | TE Connectiv... | 658.18 $ | 1000 | SHEAR HOLDER-FRONT |
2-679651-5 | TE Connectiv... | 686.32 $ | 1000 | GUIDE FRONT STRIP |
679625-5 | TE Connectiv... | 0.69 $ | 1000 | SHEAR HOLDER FRONT |
3-679651-5 | TE Connectiv... | 0.69 $ | 1000 | GUIDE FRONT STRIP |
2-679625-3 | TE Connectiv... | 0.69 $ | 1000 | SHEAR HOLDER FRONT |
1-679625-8 | TE Connectiv... | 0.69 $ | 1000 | SHEAR HOLDER FRONT |
1-679625-2 | TE Connectiv... | 332.64 $ | 1000 | SHEAR HOLDER FRONT |
2-679625-2 | TE Connectiv... | 332.64 $ | 1000 | SHEAR HOLDER FRONT |
679621-1 | TE Connectiv... | 333.68 $ | 1000 | ANVIL |
679643-1 | TE Connectiv... | 552.75 $ | 1000 | BLADE, TRIM |
679625-6 | TE Connectiv... | 287.95 $ | 1000 | SHEAR HOLDER FRONT |
679650-1 | TE Connectiv... | 0.69 $ | 1000 | INSERTER, POKE-IN |
679655-3 | TE Connectiv... | 8.32 $ | 1000 | SHUT HEIGHT GAGE(119.5MM) |
679625-3 | TE Connectiv... | 602.91 $ | 1000 | SHEAR HOLDER, FRONT |
679651-5 | TE Connectiv... | 614.97 $ | 1000 | GUIDE FRONT STRIP |
1-679625-9 | TE Connectiv... | 617.99 $ | 1000 | SHEAR HOLDER, FRONT |
679655-2 | TE Connectiv... | 6.93 $ | 1000 | TOOL SHUT HEIGHT GAUGE |
679640-1 | TE Connectiv... | 2.16 $ | 1000 | SPRING, EXTENSION |
679667-1 | TE Connectiv... | 60.61 $ | 1000 | DOOR RIGHT |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN