68422-103HLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 68422-103HLF is an integrated circuit (IC) that acts as an analog switch, allowing a single or multiple signals to be switched on and off at the same time. It is a complementary metal-oxide-semiconductor (CMOS) based IC and is part of a group of integrated circuits that are designed for analog switching.

The 68422-103HLF has a wide variety of applications, ranging from operational amplifiers and switches to computer networks and telecommunications systems. It is used in these applications because it has a good signal-to-noise ratio and low-resistance switching. This means that it can reliably switch off signals quickly and reduce noise interference. It can also operate at high temperatures and is resistant to vibration and shock.

The 68422-103HLF is designed to work with a DC voltage of 5 V. It has four control pins called anodes that allow the user to control the signal states of the device. These pins are called the enable pin, select pin, direction pin, and reset pin. The enable pin turns the device on and off, while the select pin determines which of the four outputs are to be switched. The direction pin lets the user select whether the outputs are to be active or inactive. The reset pin resets the device to its idle state.

The 68422-103HLF also has two open-collector outputs called transistors, which provide a logic-level signal that can be used for control. When the enable pin is high, the transistors are enabled and can be used to control the analog switches. The select pin then determines which output is to be selected, while the direction pin specifies which direction the output is to be in.

The 68422-103HLF operates using a fixed-frequency oscillator. This oscillator produces an electrical signal that can be used to open and close the analog switches at a specified frequency. This frequency is set by the user and is usually determined by the application in which the device is being used. It is important to ensure that the frequency is set correctly as the wrong frequency can cause the output to become unstable or cause the signal to be lost.

The 68422-103HLF is an integrated circuit that is used in many applications including operational amplifiers, computer networks, and telecommunications systems. It is a CMOS-based IC and has four control pins for controlling the analog switch. It also has two open-collector transistors for controlling the logic-level signals and operates using a fixed-frequency oscillator. This oscillator produces a signal that can be used to open and close the analog switches at a specified frequency.

The specific data is subject to PDF, and the above content is for reference