Output Type:	Darlington
Base Part Number:	6N140
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 125°C
Vce Saturation (Max):	110mV
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.4V
Current - Output / Channel:	40mA
Voltage - Output (Max):	20V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	2µs, 8µs
Current Transfer Ratio (Max):	--
Current Transfer Ratio (Min):	200% @ 5mA
Voltage - Isolation:	1500VDC
Number of Channels:	4
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

Optoisolators, also known as optocouplers, are electronic components that use light generated by a light-emitting diode (LED) to reduce the electrical noise in a system. The light from the LED is isolated using a reflective material, such as a mirror, and then coupled with a photodetector, such as a phototransistor or photovoltaic cell, to sense the LED\'s light and produce an output signal. Optoisolators are essential components for electrical systems utilizing electronics, as they insulate signals between two circuits while allowing the signals to be transmitted.The 6N140A/883B#200 optoisolator is an industrial grade, small package, side-looking, phototransistor output optoisolator. It is used to provide voltage isolation between input and output circuits, as well as to protect electrical equipment from electrical noise caused by inductive and capacitive loads. The 6N140A/883B#200 optoisolator has a wide range of applications, including motor control, industrial electronics, appliance control, medical equipment, sensor control, and safety circuits.The 6N140A/883B#200 optoisolator works on the principle of optical isolation. An infrared emitting diode (IRED) is located in the package and radiates energy in the form of infrared light. When an input voltage is applied between the collector and emitter of the IRED, the light is coupled to a phototransistor via an internal mirror. The phototransistor then converts the light energy into an electrical current, thus producing an output voltage. The input voltage range for the 6N140A/883B#200 optoisolator is 3V to 18V, and the output voltage is 4V to 12V. The isolation voltage of the 6N140A/883B#200 optoisolator is 8kVrms, which is sufficient to provide a high level of electrical isolation between two circuits. The optoisolator has a fast response time of 20 μs, and it is designed to operate in temperatures from -40°C to +85°C. It also has high power handling capabilities, with an output current capacity of up to 150mA. Additionally, the 6N140A/883B#200 optoisolator has excellent electromagnetic compatibility (EMC) characteristics, ensuring that no unwanted emissions or interference is generated. In terms of reliability, the 6N140A/883B#200 optoisolator can be expected to deliver a long service life of over 10 million operating cycles. The optoisolator is also highly resistant to moisture and other environmental conditions, and it does not require any additional external components for operation. The 6N140A/883B#200 optoisolator has a wide range of applications, including motor control, industrial electronics, appliance control, medical equipment, sensor control, and safety circuits. It can be used to protect sensitive electronic equipment from electrical noise caused by inductive and capacitive loads, as well as to prevent current from flowing between two circuits. The optoisolator can also be used to provide voltage isolation between input and output circuits.In conclusion, the 6N140A/883B#200 optoisolator is an industrial grade optoisolator that is designed to provide electrical isolation between circuits. It has a wide range of applications, including motor control, industrial electronics, appliance control, medical equipment, sensor control, and safety circuits. The optoisolator has a fast response time of 20 μs, and it is designed to operate in temperatures from -40°C to +85°C. Additionally, the 6N140A/883B#200 optoisolator has a long service life of over 10 million operating cycles, and it has excellent EMC characteristics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description