6N140A/883B#600

Series:	--
Packaging:	Tube
Part Status:	Active
Number of Channels:	4
Voltage - Isolation:	1500VDC
Current Transfer Ratio (Min):	200% @ 5mA
Current Transfer Ratio (Max):	--
Turn On / Turn Off Time (Typ):	2µs, 8µs
Rise / Fall Time (Typ):	--
Input Type:	DC
Output Type:	Darlington
Voltage - Output (Max):	20V
Current - Output / Channel:	40mA
Voltage - Forward (Vf) (Typ):	1.4V
Current - DC Forward (If) (Max):	10mA
Vce Saturation (Max):	110mV
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	16-SMD, Butt Joint, Crew Cut
Supplier Device Package:	16-SMD Crew Cut
Base Part Number:	6N140

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

6N140A/883B#600 is a type of optoisolator, which contains transistor, photovoltaic output. This device is designed for optically isolating sensitive circuits from fast circuitry and general power line disturbances which could cause false operation of the equipment. It uses a light-emitting diode (LED) to optically drive a power transistor. An optoisolator is an electronic device used to isolate two parts of a circuit electrically while allowing them to communicate with each other optically. This helps protect it from input-to-output transients and slow changes in signal level. The optoisolator works by detecting changes in the incoming signal (the input signal) and triggering a response (the output signal) on the other side of the circuit. The 6N140A/883B#600 has four pin connections. It has a collector pin (C), emitter pin (E), base pin (B), and connecting lead pin (X). The collector is connected to the output of the optoisolator and the emitter to the ground. The base is used to supply a base current to the transistor, which determines the magnitude of the output current. The connecting lead is the voltage drive circuit, which connects the photodiode (PB) to the base of the output transistor. When an input signal is supplied to the 6N140A/883B#600, the photodiode gets energized, and then produces a current that is used to trigger the power transistor\'s base. This current flows through the internal circuitry of the optoisolator and triggers the power transistor\'s base. As a result, the output current is supplied to the collector (output). The 6N140A/883B#600 optoisolator is used in application fields such as data processing, telecommunications, medical and automotive systems, and scientific instrumentation. It is especially suited for supplying current to small motors and stepping motors. It can also be used for isolating control components from high frequency signals and power line disturbances. Overall, the 6N140A/883B#600 optoisolator is a reliable and secure device that allows a signal to be transmitted safely across a circuit while providing the isolation needed for both the input circuitry and the output circuitry. It also offers protection from transient signals that could damage the system. Thus, it is an ideal choice for applications requiring isolation of circuitry from unwanted signals and/or power line disturbances.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description