7020.8540

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses

Fuses are electrical components designed to protect against electrical circuits and equipment from excessive current, usually caused by short circuits and overloads. The 7020.8540 fuse is a type of screw-in fuse that is rated to interrupt at a current of up to 15 amps. It has a voltage rating of 125VAC, which means it can withstand up to 125 volts alternating current. This type of fuse is sometimes referred to as a resettable fuse, as the fuse does not need to be replaced once it has been tripped, instead resetting by simply turning off the power and then back on again.

Application Field of 7020.8540 Fuse

The 7020.8540 fuse is used in applications which require prolonged safety in higher amperage loads. Examples of uses are lighting protection, motor and transformer protection, electrical circuit breaker panels, and distribution units. They are also commonly found in home appliances such as air conditioners, dryers, refrigerators, and furnaces. Additionally, they may be used in commercial and industrial environments for devices such as motors and elevators.

Advantages of 7020.8540 Fuse

The greatest advantage of the 7020.8540 fuse is its ability to reset, so the fuse does not need to be replaced every time it trips. This is a major cost-savings advantage over traditional blade-style fuses, which must be replaced after each trip. It also has an interrupt capacity of up to 15 amps, making it suitable for higher amperage loads. Lastly, its 125VAC voltage rating makes it one of the most robust fuses available.

Working Principle of 7020.8540 Fuse

The 7020.8540 fuse is a current-limiting fuse which means it is designed to operate at high current flow, but quickly interrupts the flow if the current increases beyond the fuse\'s trip point. This trip point is calibrated to activate at a specific current limit, usually in the range of 10-15 amps. When the current exceeds this limit, the fuse element melts, interrupting the circuit and removing the fault. Once the fault has been removed, the circuit can be reset by unplugging and re-plugging the power supply.

It is important to note that the trip point of the 7020.8540 fuse is non-adjustable. This means that the fuse must operate within the specified current limit in order to be effective. If the current is too high, it may not trip at all. If the current is too low, it may not trip quickly enough to protect against an overload.

Conclusion

The 7020.8540 fuse is an excellent choice for applications that require overload protection in higher amperage circuits. Its resettable design saves money by eliminating the need to buy replacement fuses, and it is rated to interrupt up to 15 amps with a voltage rating of 125VAC. The fuse is non-adjustable, but if used correctly offers a safe and reliable way to protect against overcurrent conditions.

The specific data is subject to PDF, and the above content is for reference