72PTR100KLF

Series:	72
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Resistance:	100 kOhms
Power (Watts):	0.5W, 1/2W
Tolerance:	±10%
Temperature Coefficient:	±100ppm/°C
Number of Turns:	1
Adjustment Type:	Top Adjustment
Resistive Material:	Cermet
Mounting Type:	Through Hole
Termination Style:	PC Pins
Size / Dimension:	Square - 0.375" x 0.375" Face x 0.187" H (9.53mm x 9.53mm x 4.75mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers provide a great solution for applications requiring a device to control electrical values within certain parameters. Trimmer Potentiometers are adjustable dependents in electronic circuits and use a set of coils, resistors, or other components to adjust the resistance of the circuit.The 72PTR100KLF is a dual-gang, single turn, wire-wound trimmer potentiometer. This trimmer can be used in various applications, such as adjustable voltage divider, antenna tuning, signal equalization, remote sensing, etc. It has an operating temperature range of -40°C to +125°C and is constructed using nickel-plated steel construction with a dielectric strength over 1000V. The 72PTR100KLF has a linear resistance taper with a total resistance of 100K ohm and can handle up to 0.4W of the power at 70°C with a temperature coefficient of 40ppm/°C.The 72PTR100KLF consists of two single-turn potentiometers connected in a dual-gang configuration. The dual-gang configuration allows for adjustable levels within the circuit. The adjustment is done using a screwdriver or knob to turn the shaft. Turning the shaft adjusts the resistance of the potentiometer which changes the current it is exposed to, allowing for an adjustable voltage value within the circuit.In terms of applications, the 72PTR100KLF can be used for adjustable voltage dividers. Voltage division is the process of dividing the input voltage into two parts, which, in the case of the 72PTR100KLF, is done by adjusting the resistance of the potentiometer. With adjustable voltage dividers, the two resistors R1 and R2 can be adjusted to set the output voltage to the desired value.Another application of the 72PTR100KLF trimmer potentiometer is antenna tuning. In this application, the potentiometer is used to set the frequency response of the antenna to the required level. This ensures that the signal sent out by the antenna is sent out with the desired strength and accuracy.Beyond these two applications, the 72PTR100KLF can also be used for signal equalization or for remote sensing. Remote sensing is a quality control measure which looks at the output of a sensor in a remote location and determines if it’s valid or not. Lastly, the 72PTR100KLF can also be used to calibrate and adjust the sensitivity of many sensors within a process or system.In conclusion, the 72PTR100KLF is a great solution for applications requiring a device to control electrical values within certain parameters. It features a dual-gang, single turn, wire-wound trimmer potentiometer with a linear resistance taper and a total resistance of 100K ohms. It can be used for adjustable voltage dividers, antenna tuning, signal equalization, remote sensing, and calibration and adjustment of sensors. With its temperature range of -40°C to +125°C and dielectric strength over 1000V, the 72PTR100KLF is an ideal trimmer potentiometer for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description