72V73273BB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic signal switches, multiplexers, and decoders are components used to provide signal routing, manipulation, and other functions in digital logic applications. The 72V73273BB is a logic switch which contains signal routing, signal selection, signal manipulation, and other digital logic functions in a single integrated circuit (IC).

The 72V73273BB is a dual 8-bits wide, high-speed, low-voltage CMOS switch designed for switching in high speed digital applications. It features an enable signal that can be used for multiplexing, providing fast switching between different signal sources. It also features a built-in active low reset signal for controlling the polarity of the output signal. This allows for fast switching of polarity which makes it ideal for use in logic amplifiers that require high dynamic range.

The 72V73273BB has the ability to operate over the entire supply voltage range from 1.2V to 3.6V and can be used in differential or single ended applications. The device also has rail-to-rail outputs which allow it to switch between the voltage rails and handle large signal swings without saturating. This device also supports the advanced CMOS fabrication process which offers higher speed, lower power, and higher reliability.

The 72V73273BB is suitable for a wide range of digital logic applications such as high-performance logic gates, logic routing, state machines, registers, multiplexers and decoders, logic amplifiers, and others. The device can be used to provide high-speed multiplexing of digital logic levels to reduce the number of logic gates required in a circuit and provide faster switching speeds than other multiplexers. It can also be used to generate pulses at higher frequencies than can be generated with other types of logic switches. The device also provides low power consumption and is suitable for use in low power applications.

In terms of the working principle of the 72V73273BB, it is based on the principle of transmission gates which allows it to manipulate levels or functions of logic signals. The device contains a set of transmission gates with input/output signals on each side. These signals are then connected to the driver which can be controlled by an enable signal. The input signals are then connected to the output within the switching circuit which is connected to the enable signal.

When the enable signal is high, the switch will connect the input to the output, allowing the logic signal from the input to be passed to the output. When the enable signal is low, the switch disconnects the input and the output and does not allow the logic signal to pass through. This enables the user to control the logic levels or functions of the output signal depending on the input levels or functions of the input signals.

The 72V73273BB is a unique logic switch that offers high performance and low power consumption, making it ideal for a wide range of digital logic applications. It can be used to route and manipulate logic levels or functions quickly and efficiently and is suitable for applications where speed and low power consumption are desired.

The specific data is subject to PDF, and the above content is for reference