Allicdata Part #: | 735-412-ND |
Manufacturer Part#: |
735-412 |
Price: | $ 49.63 |
Product Category: | Uncategorized |
Manufacturer: | Altech Corporation |
Short Description: | AK012 250X200X122MM ENCLOSUREPOL |
More Detail: | N/A |
DataSheet: | 735-412 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 45.12060 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A 735-412 application field and its working principle is used to control utilities as well as providing protection for electrical appliances. It utilizes a one-way electrical path between the incoming supply and the load. The 735-412 application is used in homes and other structures with a large number of electrical appliances that need protection from over-amperage or short circuits. It works by providing a small voltage drop across the load when it sees an over-amperage or short circuit. This voltage drop causes a protective circuit breaker or fuse to open, preventing the flow of electricity.
The 735-412 application is mainly used for residential and commercial installations, as it is easy to install and use. It is designed to be installed between the incoming supply and the load side of the installation. It is also capable of operating at much higher voltages than the incoming supply, which makes it suitable for higher power applications. It is also capable of detecting faults, such as an overload, short, or ground fault, and cutting off the electrical supply to the load.
The 735-412 working principle is based on the concept of a one-way electrical path. It works by detecting any excessive amperage or voltage on the incoming supply, and then performing an electrical trip operation. This trip operation involves breaking the one-way circuit, thus interrupting the flow of electricity between the period when the fault is detected and when it is cleared. This interruption in the circuit (or the trip action) prevents a high current from flowing to the load, thus protecting it from any damage due to a current surge or other fault.
The 735-412 application is typically connected in series with the main supply. It is usually installed in the form of an electrical panel to regulate the incoming supply and the load. The 735-412 works by detecting faults, sending a signal to the main supply, and switching to the off-state to cut off the supply. This will usually shut off the power to the load side and ensure that the appliance does not suffer any damage.
The 735-412 application is used in many different types of electrical installations, including residential and commercial installations. It is commonly used to control and protect against overloads and short circuits in large electrical installations. This type of application is reliable and easy to install, making it an ideal choice for a variety of applications. It is important to properly install the 735-412 application to maximize its effectiveness for the particular installation it is being used in.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE