7406-RC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes, or CMCs, refer to any device used to reduce or eliminate common-mode current in electronic systems. Common-mode current is the current flow of electrons through components of an electronic system in a single direction. Common-mode current is usually present in devices such as analog signal processors, high-frequency amplifiers, and computers. It can also be found in power transmission lines. CMCs are used to reduce or eliminate this current by providing magnetic flux to the components, which has the effect of reducing or eliminating the common-mode current.

The use of CMCs is essential in many electronic devices because they can help to improve the performance, reliability, and noise immunity of the device. This can be especially beneficial for high-frequency applications as they can significantly reduce the susceptibility of the device to EMI (electromagnetic interference) from other nearby devices and electrical interference from outside sources. CMCs can also be used to reduce the amount of power that is dissipated in the system due to common-mode currents.

7406-RC application field and working principle is one such common mode choke used in various electronic systems. It is a three-port broadband high power common-mode choke with an operating frequency range up to 5000MHz. The design is based on a three-port transformer configuration and is optimized for low common-mode impedances. It features a wide bandwidth of 4.5 octaves (180MHz to 5000MHz), low insertion loss of less than 0.87dB, and high isolation of greater than 24dB. Its low common-mode impedance makes it suitable for use in high-speed analog and digital applications.

7406-RC has been designed to reduce the amount of common-mode interference, noise and crosstalk experienced on a board with densely packed components. The device provides a low-cost common-mode noise reduction solution that can be readily incorporated into the board design. When using the 7406-RC, it should be placed as close as possible to the source of the interference. It should also be kept away from other components and wires as this will reduce the effectiveness of the device. Additionally, to ensure optimal performance, its mounting position should be optimized to minimize the area of transmission line loops.

The 7406-RC is designed to provide minimal insertion loss across a wide frequency range, but it is important to note that it may not be suitable for some severe high-frequency applications due to its lower isolation levels. When this is the case, additional components such as resistors and capacitors may need to be incorporated into the design to supplement the common-mode filtering offered by the choke. It should also be noted that the 7406-RC should not be used in applications that require more than 500mA of current or 10 Amps of average power.

The 7406-RC is a very versatile common-mode choke that can be used in a variety of digital and analog applications. It is a cost-effective solution for those looking to reduce or eliminate common-mode interference, noise, and crosstalk, while also providing a high level of power dissipation and a wide bandwidth. It can be used in a range of applications from complex RF systems to simple audio systems, ensuring that it can be easily integrated into any electronic system.

The specific data is subject to PDF, and the above content is for reference