74ABT573CPC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74ABT573CPC is an integrated circuit, which belongs to the family of latches. It is helpful for controlling and buffering the data signals in a digital system and is widely applicable in many fields. This article will discuss the application field and working principle of the 74ABT573CPC.

Application Field: The 74ABT573CPC is primarily used in digital systems, with some applications being specifically in embedded systems and serial communication. This IC helps to hold data and pulses in a frequency-independent manner, and control the identical sequences inside the digital systems with ease. Due to its small size, low cost and high performance, it has also become popular in many consumer electronics like TVs, cameras, and phones.

Working Principle: The 74ABT573CPC consists of two 3-state latches. Each latch is capable of holding eight bits of information, adding up to a total of sixteen bits of data, depending on the designed application. The device has three differential inputs, OUTA, OUTB, and OE. It also has six Output Enable pins, which are used to control the latch outputs. The device also has eight address pins, eight data pins, and eight control pins, allowing for customized settings to be programmed into it.

When the latch OutA is enabled, the data present on the D-input is stored in the latch and appears at the output OutA. Similarly for OutB, when the latch OutB is enabled, the data present on the D-input is stored in the latch and appears at the output OutB. The device also has built-in delay before the data appear at the output pin, which is adjustable by programming through the address and data pins.

The output enable pins are used to control the latch outputs. When the output enable is low, the output state is in low impedance, which is referred to as the 3-state condition. When the output enable is high, the output state is in high impedance, which is referred to as the disable state. This makes it possible for multiple devices to share the same output pins without interference.

The 74ABT573CPC is a powerful IC, with a wide range of applications in many digital systems. It offers the flexibility to adjust the delay time of the outputs and the ability to control the output states with ease. This makes the 74ABT573CPC an ideal choice for many projects and applications.

The specific data is subject to PDF, and the above content is for reference