74AC11074DR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A flip-flop is an electronic device which is used to store digital information. The 74AC11074DR is an example of this technology, a dual 4-bit register with a typical propagation delay of 21 ns and a maximum power of 435 mW. It is available in both standard (SOIC) and low-profile (MSOP) packages, allowing it to be used in either small or large applications.

This device is most commonly used as a component in a logic circuit and is known for its ability to hold a digital value for a relatively long period of time. It is also used to enable and disable certain functions, buffer and enable multiple signals, create clock signals, and more. The 74AC11074DR is a special type of flip-flop known as a register, which is capable of operating with two different types of clock inputs, a positive-edge (posedge) clock and a negative-edge (negedge) clock.

The basic operation of this device is based on the SR (set/reset) flip-flop, which was developed by American engineer E.F. Codd in 1940. In this type of flip-flop, two digital inputs, S (set) and R (reset), are used to control the state of the flip-flop. When both S and R are low, the flip-flop is in a stable state; when both S and R are high, the flip-flop is in an unstable state; and when S is high and R is low, the flip-flop is in a set state, and when S is low and R is high, the flip-flop is in a reset state.

The 74AC11074DR operation is based on the same principle, but with the addition of two different clock inputs - a positive-edge (posedge) clock and a negative-edge (negedge) clock. When the posedge clock is active, the device samples the value of its inputs and stores the value at the end of the posedge clock. Similarly, when the negedge clock is active, the device samples the value of its inputs and stores the value at the end of the negedge clock. This allows the device to operate with two different types of signals, enabling it to be used in a variety of applications.

In terms of applications, the 74AC11074DR is suitable for use in high-speed logic applications, especially in data storage and communications. Due to its dual clock inputs, it is capable of operating with both positive and negative edge clock signals and can be used as a buffer for multiple signals. It is also suitable for use in clock circuits, as it can generate clock signals from non-periodic external signals, as well as being used as a register in a microprocessor system.

The 74AC11074DR is a reliable and efficient electronic device which is commonly used in high-speed logic and communications applications. It is based on the SR flip-flop, but with the addition of dual clock inputs for greater flexibility. With a typical propagation delay of 21ns and a maximum power of 435 mW, it is suitable for a wide range of applications, including data storage, communications and clock circuit design.

The specific data is subject to PDF, and the above content is for reference