74ACT11032D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT11032D is a high-speed 3-to-8 line multiplexer / demultiplexer from Texas Instruments. It is designed for high-speed bus switching applications. This integrated circuit (IC) operates from a single 3.3V supply and its output levels are compatible with both TTL and CMOS systems. This device has very low on resistance and fast switching times.

The 74ACT11032D has three input lines and eight output lines, which allow for its versatile implementation as a multiplexer or a demultiplexer. As a multiplexer, it can take one of the three input signals and route it to any of the eight outputs. As a demultiplexer, it can route the one input signal to any one of the eight outputs.

The device has a single select line (S) and three select inputs (A0, A1, A2). Based on the digital state of these select inputs, the 74ACT11032D can be configured as either an 8:1 multiplexer or a 1:8 demultiplexer. A low signal on any of the select inputs of the device causes the output line connected to that input to be activated. The select line (S) must be held at a logic low for the device to function properly.

The 74ACT11032D is a high-speed static CMOS device, with typical propagation delay times of about 7.5ns. This IC can operate at temperatures up to 85°C and has a wide supply voltage range from 2.7V to 3.6V. It also has excellent noise immunity and very low power dissipation. The device is available in an 8-pin plastic dual inline package (PDIP).

The 74ACT11032D is typically used in data processing, telecommunications, computer buses, and large-scale information systems. It is also commonly used in high-speed memory buses and other applications that require fast switching rates. This device can be used in both multiplexed and demultiplexed configurations and can be implemented in both low and high-speed digital systems.

In summary, the 74ACT11032D is a high-speed 3-to-8 line multiplexer / demultiplexer from Texas Instruments. It is designed for high-speed bus switching applications. This IC can switch between three inputs and eight outputs and has a single select line and three select inputs. It is a static CMOS device with a wide voltage range and a very low power dissipation. It is typically used in data processing, telecommunications, computer buses, and large-scale information systems.

The specific data is subject to PDF, and the above content is for reference