74AC125PC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74AC125PC is a logic IC from the Quad Buffers and Line Drivers family. It is used for buffering data that needs to be sent over a long distance. It is also used to convert circuits from one logic family to another. It buffers low power, slow speed or high noise circuits from driving higher fan out loads, while providing enough drive to reduce the overall power consumption.

The 74AC125PC has four independent buffers which are designed to operate both in transparent and non-transparent latch modes. Each of the buffers has an active low output enable (OE) input to activate or deactivate the output. It features an open collector Schmitt trigger on the input which is designed to improve switching speed and noise reduction on the input logic level.

The 74AC125PC operates in two modes: transparent latch (CLK goes high) and non-transparent latch (CLK goes low). It also works with a variety of different input logic levels such as 3.3 V, 5V, 12V, and 10V. The outputs are CMOS compatible which makes it a versatile logic buffer for various applications.

The 74AC125PC can be used in a variety of applications. It can be used as an output driver for high-speed I/O systems, interface between ASICs and FPGAs, or as buffers to extend cable lengths orbetween low voltage or low speed devices. It can also be used in memory and microprocessor applications, multimedia/video applications,and embedded system applications as well.

The working principle of 74AC125PC is very simple. It buffers the input data level by using its active input circuitry. The CLK pin is used to select either transparent or non-transparent latch mode. When CLK is low the IC is in non-transparent latch mode and will retain the data that was present when CLK was high. When CLK is high the output will follow the data present on the inputs.

The OE pin is used to enable or disable the output buffers. When OE is low the output is disabled and the output is held in a high impedance state. When OE is high the output will follow the input logic level.

74AC125PC is a versatile logic buffer with a wide range of applications. It is used to extend cable lengths, to interface between ASICs and FPGAs, and to provide operational power to low voltage or low speed devices. It can be used in memory and microprocessor applications, multimedia/video applications, and embedded system applications. It has active input circuitry which helps to buffer and drive the output logic level. It can operate in both transparent latch and non-transparent latch modes with a CLK pin to select the desired mode. The OE pin is used to enable or disable the buffering of the output.

The specific data is subject to PDF, and the above content is for reference