74AC541MTC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AC541MTC is a logic buffer that has a data propagation delay time of 1.65 ns (1.0 V), no dropout voltage and low offset voltage. It is suitable for a wide range of digital processing applications, such as buffer registers, arithmetic registers and control registers.

Being a logic buffer, its main use is to amplify a digital signal for transmission over long cable runs. The 74AC541MTC also features independent power shutdown and active high enable/disable inputs, allowing complete control over the operation of the device. It supports both LS (low-speed) and HS (high-speed) operation, allowing it to be used in any application with either clock speed.

The 74AC541MTC is a two-stage device, with two tristate outputs. When the enable pin is pulled low or left open, the outputs will be disabled and their corresponding pins will remain floating. When the enable pin is pulled high, the two output stages will be enabled and the corresponding pins will provide the correct output signal in accordance with the input signal. The two stages of the device provide signal amplification, allowing the input signal to be amplified and transmitted over a longer cable run with less signal degradation than a single stage device.

The 74AC541MTC has a low power dissipation of 0.6 mW, making it suitable for battery-powered applications. It operates at a maximum operating voltage of 7.0 V and is Latch-up protected. It features both active high and active low inputs and outputs and is constructed from advanced CMOS technology, allowing for high speed performance.

The 74AC541MTC has a voltage range of 0.4 V to 7.0 V and is a 5V-tolerant device. This makes it ideal for mixed voltage logic systems, as it can be used with 5V and 3V logic signals. The 74AC541MTC has an extended temperature range of -40°C to +85°C and can be used in harsh environments.

In summary, the 74AC541MTC is a high speed, low power CMOS buffer with a wide range of applications. It is suitable for a range of digital processing applications, such as buffer registers, arithmetic registers and control registers. It also features independent power shutdown and active high enable/disable inputs, allowing complete control over the operation of the device. The 74AC541MTC is an ideal choice for mixed voltage logic systems, as it features both active high and active low inputs and outputs and can be used with 5V and 3V logic signals. It operates at a temperature range of -40°C to +85°C, making it suitable for harsh environments.

The specific data is subject to PDF, and the above content is for reference