74ACT2708

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT2708 is an 8-bit FIFO (First-In -First-Out) Memory designed for synchronous applications Peripheral Interface Adapter (PIA) such as data communication and automotive applications. It is an asynchronous FIFO memory available in commercial, industrial, and automotive temperature ranges. The memory\'s eight-bit width simplifies chip-level assembly by using two 8-bit devices in parallel data bus designs.

The 74ACT2708 synchronous FIFO is capable of operating at very high speeds with access times as low as 70 ns and a maximum clock frequency of 72 MHz. This makes it ideal for high speed data communication applications such as data transfers, networking, and storage.

The 74ACT2708 synchronous FIFO has an 8-bit output register and an 8-bit input register that allows the user to store and retrieve data from the FIFO. The FIFO has an 8-bit data bus and a separate control bus that allows the user to access and control the FIFO. The input and output registers can be written and read from any memory address in the FIFO.

The primary purpose of the 74ACT2708 is to store data in a manner that it is always available when needed. For example, it can be used to store data that is to be transferred between two memory systems, such as two computers. It can also be used to store data that is to be processed or analyzed in a single system. The FIFO can store data for a short time and then retrieve it when needed. This allows for efficient performance and processing of data.

The 74ACT2708 works by capturing data and storing it sequentially, in a first-in -first-out manner. Data is received on the input register, which is then pushed onto the output register. When the data in the output register is retrieved, the empty space is filled with the next data that is received. This operation continues until the FIFO is full, at which point the output register contains the oldest data and the input register is empty. When the result is no longer needed, the data is flushed in a process known as flushing.

The 74ACT2708 synchronous FIFO uses advanced integrated circuit technology to ensure reliable data transfer. It features inputs and outputs in both-edge clocking mode, single-ended addressing, programmable FIFO threshold, and flow control through pin control options. All inputs are TTL compatible and are monitored for level, voltage and timing. It also provides protection for overvoltage and static discharge.

In addition to its standard functionality, the 74ACT2708 includes embedded error correction, ECC memory and clocking circuit to enhance its performance. It can also be used to reduce the power consumption of data communication systems by automatically entering power down mode when no activity is detected. The device also includes embedded self-test logic to aid in system health monitoring and reduce the time needed for troubleshooting.

The 74ACT2708 is a reliable, high performance FIFO memory designed for a wide range of applications. It is ideal for use in data communication and automotive applications where speed, performance, and data integrity are paramount. It features an 8-bit output register, 8-bit input register, error correction, and clocking circuit, making it an ideal solution for today’s high-speed asynchronous data communication needs.

The specific data is subject to PDF, and the above content is for reference