74ACT534SC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip-flops are logic circuits that store information in their state. The 74ACT534SC is a dual 4-bit negative-edge triggered flip-flop. It\'s used in applications such as digital counters and shift registers, clocked multiplexers and de-multiplexers, and sequential logic circuits. It can also be used in multiplexer/demultiplexer/oscillator circuits.

The 74ACT534SC has two data inputs, E and O, that allow data to be written into the flip-flop. Data is clocked into the flip-flop by a clock input, CP. This data is then stored until the clock input is triggered again. When the clock is triggered the data is written into the flip-flop and the previous data is overwritten.

The 74ACT534SC also has a reset or clear input, CLR. This allows all the bits in the flip-flop to be set to 0. This can be used for resetting the counters, for example. It also has an output enable input, OE, that allows the outputs of the flip-flop to be enabled or disabled.

The 74ACT534SC is a synchronous bistable latch. The clock input is used to synchronize the data into the flip-flop and the latch is bistable as it has two stable states and can remember when it is set to a 1 or a 0. It is triggered by a negative edge, which means when the clock input is at a high voltage level and it drops to a low voltage level, the data is clocked into the latch and stored until the clock input is triggered again.

Due to the 74ACT534SC\'s high speed and low power consumption, it is particularly useful for high speed applications such as clocked multiplexers and shift registers. It is also ideal for low power applications due to its low power consumption. The 74ACT534SC is widely used in digital signal processing, communication systems and industrial control systems.

In summary, the 74ACT534SC is a dual 4-bit negative-edge triggered flip-flop. It is used in applications such as digital counters and shift registers, clocked multiplexers and de-multiplexers, and sequential logic circuits. It is triggered by a negative edge and due to its high speed and low power consumption, it is particularly well suited for high speed applications and low power applications.

The specific data is subject to PDF, and the above content is for reference