74ACT652MTCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT652MTCX is a 8-bit transceiver, often used as a line driver, line receiver, or in bidirectional bus-oriented applications. It provides the performance of low-power Schottky TTL, with a 0.7V to 4.75V supply range and an 8-bit output port that can drive up to 10 TTL loads. Its low input and output peak currents allow for automotive, portable equipments, or any applications demanding one of the lowest power consumption levels among the logic families. The 74ACT652MTCX is featured with a series of control options that allow it to handle switching and signal transmission in either direction. Data direction, active control, and output enable signals provide total control over data flow and system performance.

The 74ACT652MTCX is powered by a 0.7V to 4.75V supply range and operates between -55°C and 125°C temperature range. It is constructed with an asynchronous design wherein the outputs, either high or low, remain unchanged until the next instruction is given. As in many TTL and other logic families, the inputs to the 74ACT652MTCX are TTL level compatible and are open-drain outputs.

The 74ACT652MTCX, like many other transceivers, provides two types of data flow, one being in and one being out. The input of the 74ACT652MTCX can be controlled by three signals. The Data Direction (DDR) control signal determines the direction of the data flow and reads either HI or LO. The Active High Control (CP) control signal causes data to flow in the direction determined by the DDR control signal and reads either HI or LO. The Output Enable (OE) control signal is used to inhibit the output of the transceiver and reads either low or HI.

The working principle of the 74ACT652MTCX is based on the concept of transferring a data value from one logic level into another. This is most commonly seen in applications for communication, where one logic level is either pushed or pulled from a source to a destination. The 74ACT652MTCX allows data to transfer from a source to a destination by sending and receiving data from both the input and output terminals. Data is pushed from the source to the destination via the DDR, CP, and OE control signals. When the Data Direction (DDR) control signal is HIGH, data will be transferred from the input to the output. When the Active High Control (CP) control signal is HIGH, data will be inverted at the output. When the Output Enable (OE) control signal is HIGH, data will be inhibited.

The 74ACT652MTCX can be used in a variety of industrial and automotive applications where high-speed communications and low power consumption are required. Its 8-bit bidirectional port allows for efficient exchange of data between different devices, making it a reliable solution for embedded systems. The data flow control, low voltage operation, and low power consumption make the 74ACT652MTCX a preferred choice for applications that require performance at lower supply voltages. Furthermore, the low output peak current of the 74ACT652MTCX helps in improved portability and reliability.

This TTL transceiver can be used in automotive, portable and other applications where low power consumption is critical. Its 4.75V to 0.7V wide supply range enables the 74ACT652MTCX to be used in high temperature applications and is designed to consume less power than a traditional TTL logic family. The 74ACT652MTCX also has an asynchronous design, allowing it to accommodate multiple bus-oriented data transfers with a single instruction. Furthermore, the three-signal control determines the direction of the data flow, allowing for great flexibility in almost all applications.

The specific data is subject to PDF, and the above content is for reference