74ACTQ652MTCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Buffers, Drivers, Receivers, Transceivers

The 74ACTQ652MTCX is a logic device designed for applications requiring low power consumption and high noise immunity. It is a transceiver that is available in 8-bit or 16-bit versions. The device is designed to provide simultaneous transmission and reception of data in both directions. It is part of the ACT family of logic devices, which are designed for high performance and low power consumption.

The 74ACTQ652MTCX is designed for applications including digital video, telecommunications, data networking and other high-speed switch logic applications. It features a low power consumption operation and a wide operating temperature range between -40 and +85 ° C. The device also features an enhanced ESD protection on the interfaces, which ensures high reliability and robustness.

The 74ACTQ652MTCX is available in 8-bit or 16-bit versions. It is a 16-bit transceiver that supports full-duplex operation on two separate buses. It is capable of bi-directional data transfers without the need to switch between input and output modes. The device supports both unidirectional and bidirectional data transfers with a maximum transfer rate of 22.5 MHz.

The 74ACTQ652MTCX is composed of four parts: a bus transceiver, a bus isolation circuit, a clock isolator, and a control block. The bus transceiver enables the input/output data flow. The bus isolation circuit isolates the buses from each other to ensure that data is transferred reliably. The clock isolator provides a path for the clock signal to be direct between the two buses. The control block is responsible for the control signals, including the write enable and read enable signals.

The bus transceiver is the main component of the 74ACTQ652MTCX. It consists of two half-duplex circuits that enable simultaneous transmission and reception of data in both directions. Each half-duplex circuit contains sixteen bidirectional latches that allow data to be transferred to and from the destinations. The half-duplex circuit also provides the write enable and read enable signals for each of the sixteen data lines.

The bus isolation circuit isolates the two buses from each other. This prevents data from being corrupted by signal cross-talk. The clock isolator provides a path for the clock signal to be faster than the data, allowing more data to be transferred with fewer errors. The control block is responsible for the control signals, write enable and read enable, which determine when data can be written to or read from each of the sixteen data lines.

The 74ACTQ652MTCX is a high-speed logic device designed for applications requiring low power and high noise immunity. It is capable of bi-directional data transfers with a maximum transfer rate of 22.5 MHz. The device is also equipped with an enhanced ESD protection that ensures high reliability and robustness. The device is suitable for applications including digital video, telecommunications, data networking and other high-speed switch logic applications.

The specific data is subject to PDF, and the above content is for reference