74ACT258SCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACT258SCX is a monolithic CMOS integrated circuit that can be used for several applications, including logic-signal switching, multiplexing, and decoding. It is one of the most popular integrated circuits used in the field of electronics, due to its high speed, low power consumption, and low cost.

The 74ACT258SCX is a dual 4-to-1 multiplexer, which means it can select one of two sets of four digital inputs using a pair of selection input (s) signals (X1, X0). It is made of 10 N-type and 14 P-type MOS devices, combined together with a common power supply, and has a maximum supply voltage of 5.5V.

The 74ACT258SCX can be used for a variety of different purposes. It can serve as a logic-signal switch, by routing one of the eight inputs to the output based on the status of the selection inputs. It can be used as a multiplexer, by routing one of the four sets of data inputs to the output based on the status of selection inputs. Finally, it can be used as a decoder, by selecting the correct combination of signals from an encoded input.

The 74ACT258SCX is typically used in clocked applications, such as digital logic and memory devices. By using a clock signal, it can operate in one of two modes – static or dynamic. In static mode, the input and output values remain static and are only affected by changes in the selection input signals. In dynamic mode, however, the input and output values are affected by both the selection input signals and the clock signal.

The working principle of the 74ACT258SCX is fairly simple. When the selection inputs (X1 and X0) are set to a logic 1, they enable the multiplexer and allow the N-type MOS devices to form a path from one of the four sets of inputs (A0-A3, B0-B3, C0-C3, or D0-D3). This path is then connected to the Y output. When the selection inputs (X1, X0) are set to a logic 0, all of the N-type MOS devices are turned off, isolating the Y output. If a clock signal is used, the multiplexer is dynamically controlled, allowing multiple bits to be input and output at higher frequencies.

The 74ACT258SCX is a versatile integrated circuit that can be used to accomplish a wide variety of tasks. Its simplicity and low power consumption make it a popular choice among electronics engineers, especially those in the field of digital logic and memory devices. Whether it is being used as a logic-signal switch, multiplexer, or decoder, the 74ACT258SCX can handle the job with ease.

The specific data is subject to PDF, and the above content is for reference