74ACTQ16244SSCX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74ACTQ16244SSCX is a high-speed CMOS Logic Quad Buffer/Driver with 3-State outputs, designed for 21 MHz (typ) or 30 MHz (max) operation in high-performance memory, microprocessor and bus orientated systems. They are fabricated with an advanced dual metal CMOS architecture to achieve high speed operation with low power dissipation over the full military temperature range of -55°C to 125°C. This device utilizes the Schottky TTL (STTL) logic and is a true 4 input CMOS device designed so that when VCC is applied, all four inputs are enabled and the outputs switch in a static state determined by the input level. It also features 3-state outputs for bus operation.

The 74ACTQ16244SSCX falls into the category of Logic - Buffers, Drivers,Receivers, Transceivers. This type of device is characterized by their ability to interface electrical-signals from one circuit to another. They can buffer data and provide the disconnection of multiple controllers on the same bus. They are also used for high-speed data transmission, level-shifting and line drivers. The 74ACTQ16244SSC factor further increases its useful applications in integrated memory systems where partitioning is required.

The 74ACTQ16244SSCX buffer/driver has four independent high-speed gate circuits which perform the buffering/driving functions. It is a four-state device with separate output gates, three-state drivers, and bidirectional input gates. For each channel, the channel output line has a separate pull-up resistor and can be interrupted by the common reset control. Logic Control signals can be used to control data flow in either direction. The output is enabled by a logic “1” and disabled by a logic “0”. When disabled, the output returns to a high-impedance condition.

A typical application for the 74ACTQ16244SSCX involves using it as a level shifter. This can be achieved by using one buffer/driver as an input and the other buffer/driver as an output. The input buffer provides level shifting for the data to be transmitted. The output buffer then translates the data to the necessary logic level. Additionally, some applications use buffer/driver ICs for waveform shaping, or waveform clamping to synthesize a waveform. This same waveform can then be used as a reference in other circuits.

In Conclusion, the 74ACTQ16244SSCX is a high-speed CMOS Logic Quad Buffer/Driver with 3-State outputs, designed for 21 MHz (typ) or 30 MHz (max) operation in high-performance memory, microprocessor, and bus-oriented systems. It falls into the category of Logic - Buffers, Drivers, Receivers,Transceivers and is characterized by their ability to interface electrical-signals from one circuit to another. This is particularly useful for level-shifting, data transmission, waveform shaping, and waveform clamping. Thanks to its high-speed operation and low power dissipation, it is perfect for use in integrated memory systems where partitioning is required.

The specific data is subject to PDF, and the above content is for reference