74AHC123AD-Q100J

Series:	Automotive, AEC-Q100, 74AHC
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Monostable
Independent Circuits:	2
Schmitt Trigger Input:	No
Propagation Delay:	5.1ns
Current - Output High, Low:	8mA, 8mA
Voltage - Supply:	2V ~ 5.5V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SO
Base Part Number:	74AHC123

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multivibrators are circuits in which the output of an amplifier or oscillator is connected to the input. These are used mainly in applications that require rapid rise and fall times, such as pulse generation and clock generation. The 74AHC123AD-Q100J is a dual-monostable multivibrator, also known as a flip-flop.The 74AHC123AD-Q100J has two independent monostable circuits, each able to operate independently. It is designed to be used in 5V, 3V and even lower supply voltages, being suitable for use with TTL, CMOS and AHC logic. The 74AHC123AD-Q 100J is a programmable, dual monostable multivibrator with both pulse-width and pulse-rise/fall times adjustable for a wide range of applications.As the name implies, a monostable multivibrator has two stable states. When the Chip Enable (CE) pin is reset, the output is held at its \'Low\' level. When the CE pin is triggered, the output switches to its \'High\' level for a set period of time, determined by the RESET and SET inputs. When the time is up, the output reverts to its \'Low\' level until a new trigger is received by the CE pin.The trigger can be obtained from an external source, such as a control logic circuit or a pulse generator. The trigger pulse is applied to the CE pin, causing the output pulse to start. The pulse duration can be adjusted to any desired time by setting the RESET and SET inputs. The input resistors (R1 and R2) can be adjusted to control the rising and falling times of the output pulse.The 74AHC123AD-Q 100J is designed to provide very low power consumption and significantly reduced EMI radiation. It can also operate in both ac and dc logic operations. It is suitable for applications such as clock generation, pulse waveform generation, waveform shaping, signal trigger delay, signal sequencing and waveform storage.The 74AHC123AD-Q100J is a dual-monostable multivibrator ideal for use in a wide variety of applications. Its low power consumption, reduced EMI radiation, adjustable pulse-width and adjustable pulse rising/falling times make it an excellent choice for applications requiring precise timing control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description