74AHC123APW,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic multivibrators are electronic devices used to create two stable states in circuits. The 74AHC123APW,112 is a high speed, dual monostable multivibrator device that is used to generate an accurate pulse width output. It features low active quiescent current and very low off current consumption when powered off. This device is well suited for low power and communications applications.

Application Field of the 74AHC123APW,112 Device

The 74AHC123APW,112 dual monostable multivibrator is designed for use in automotive applications, telecommunications, consumer electronics, and general computer applications. Its fast response time makes it particularly useful for radio frequency applications such as timing and pulse generation. This device is designed to be used with low power and communications applications, as it has very low active and off currents for power savings.

Working Principle

The 74AHC123APW,112 dual monostable multivibrator is an electronic circuit that has two stable states. It is composed of two logic gates connected in a mutual feedback arrangement. The device is triggered when a rising edge is detected by one of its inputs. After the device is triggered, it will remain in its triggered state until a certain time interval has elapsed. Once the interval has elapsed, the device will reset back to its original state.

When a pulse is applied to either input of the 74AHC123APW,112 device, it will trigger the monostable and cause its output to go high and remain high until the necessary time period has elapsed. This time period is determined by the resistor and capacitor that are connected to the device’s trigger pin. Once the set time period has elapsed, the output will return to its original state.

The second input of the 74AHC123APW,112 is an enable pin. This pin must be held high for the device to operate. The enable pin can be used to control when the device is triggered, allowing the user to control the pulse width of the device’s output.

The 74AHC123APW,112 dual monostable multivibrator is a versatile device that can be used to generate accurate pulse widths. Its fast response time and low power consumption make it particularly suitable for low power applications, such as automotive and telecommunications.

The specific data is subject to PDF, and the above content is for reference