74F579SJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74F579SJ is a frequency divider or counter chip produced by Fairchild Semiconductor. It is part of the 74F series which are fast, low power, CMOS logic devices. It can count up or down and divide any frequency as long as the pulses are in the proper logic levels. The chip is used mainly for dividing clock pulses in computers, digital systems, and other electronic applications.

The 74F579SJ can divide both clock and data frequencies. It has two separate counter inputs that can be programmed to divide frequencies from 100 Hz to 35 MHz. This makes it the ideal choice for applications where a wide range of divider values are needed. The chip has a selectable active-low output for high-speed operation, and a high-speed ripple output for accurate timing.

The basic operation of the 74F579SJ can be summed up as follows: it receives an input clock pulse and uses it as the control signal for a digital divider. This divider can be configured to count up or down, or to divide by a specific number of pulses. The counter chip will then output a digital signal at the end of each count. This signal can be used to drive other logic devices in a system.

The 74F579SJ can also be used as a frequency divider or counter, allowing higher frequencies to be divided down to values suitable for digital systems or controller applications. To use the chip in this way, the CLK input is connected to the input clock, and the LOAD input is connected to an appropriate logic level. The output of the chip can then be used to drive other logic devices in the system.

The chip requires power from a single 5V supply and has a low power consumption of 3.2 mA. It also features an active low output for high-speed operation and an internal ripple counter for accurate timing. The chip can be programmed to divide frequencies from 100 Hz to 35 MHz, making it suitable for most applications.

The 74F579SJ can be used in various applications where frequency division or counting is needed. It is especially useful in digital systems, where high-frequency signals are divided down to frequencies that can be used by other logic devices. It is also used in frequency counter systems and test equipment. The chip allows clock frequencies to be divided down to values suitable for digital systems or controller applications.

In summary, the 74F579SJ is a frequency divider or counter chip that can count up or down and divide any frequency. It is suitable for a wide range of applications where frequency division or counting is required. The chip requires power from a single 5V supply and has a low power consumption of 3.2 mA. The output of the chip can then be used to drive other logic devices in the system.

The specific data is subject to PDF, and the above content is for reference