74HC191PW,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC191PW,112 is a counter belonging to the logic family of Logic – Counters, Dividers. It is an 8-bit binary up/down counter consisting of two 4-bit counters, that can count from 0 to 9 if used with 3 lines of input. The chip consists of a built-in oscillator and a counter, performing up or down counting depending on a select option using a ripple carry output (RCO).

This chip is typically used in the field of digital electronics, wherein the user can switch between up and down counting by providing pulses to the count enable (CE) input. Variations are possible to connect up multiple chips, allowing them to work in unison for higher bit counting. This chip is also capable of multi-stage counting, where a string of counters count in tandem to achieve the desired higher order of counting.

The base architecture of the 74HC191PW,112 makes it an ideal tool for developing multiple devices such as frequency dividers, pulse generators and advanced timing/delay functions. The chip\'s simple and linear design allows it to be controlled using basic logic gates. Thus, it stands as a good fit when designing cost-efficient devices.

The chip is based on the asynchronous design principle and operates at relatively low voltage levels – the input voltage range is 2V to 6V and the logic level thresholds are 1.5V and 2.7V. The output pins are of open-drain structure, which means it only supports sinking of current and not sourcing.

In terms of working principle, the 74HC191PW,112 operates in two distinct modes, depending on the state of the count enable input signal. When the CE is low, the chip is disabled and the output is held stable, even if clock pulses arrive at the input. But when CE goes high, the chip starts functioning as a up or down counter. Various other pins in the chip such as \'carry out\' (CO) and overflow are used to transfer the counting state from one logic stage to the next for multi-stage counting or data transfer.

Inforamtion about the current state of the counter can be obtained by reading the count output at the output pins. The chip also supports an asynchronous reset pin (CLR). When triggered, this pin sets all of the output pins low, regardless of its counting state. The counter circuit also has a load input (LD) which, when driven high, facilitates loading of data into the internal latch.

Overall, the 74HC19PW,112 is a useful chip to have in one\'s collection of digital electronics components. Compact and efficient, this chip is the perfect tool for developing custom-made devices such as timing circuits and frequency dividers. The logic families of Logic – Counters, Dividers make optimal use of the chip to create a wide range of practical applications.

The specific data is subject to PDF, and the above content is for reference