74HC4017BQ-Q100X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74HC4017BQ-Q100X is a counter that utilizes a Johnson counter, otherwise known as a twisted-ring counter. It is a type of shift register that acts as an up/down counter, and is a member of the 74HC family of logic circuits since it was manufactured by the Sang-Eun Electronic Company in the 1970s.

The 74HC4017BQ-Q100X is a popular piece of hardware due to its high-speed performance and low-power operation. It operates according to the basic principles of logic, namely that its outputs are determined by the combination of its inputs. The circuit consists of sixteen flip-flops that sequence through a cycle of fifteen binary numbers. This sequence is divided by four to create four outputs that output a single logic pulse each.

The 74HC4017BQ-Q100X has a variety of applications, particularly in the field of industrial automation. It can be used for counting and indexing in processes that require a precise level of control. It can also be used for timing processes such as the operation of production lines where a short pulse is required to trigger an event. It can also be used in digital devices such as computers to control processes where it can detect and respond to a digital signal.

The 74HC4017BQ-Q100X operates on the principle of logic gates. This means that it takes two inputs and produces two outputs, depending on the combination of the inputs. For example, a 0-input paired with a 1-input would result in a 1-output, while a 1-input paired with a 0-input would result in a 0-output. The 74HC4017BQ-Q100X can be configured in either a “forward-counting” or “backward-counting” mode by changing the logic values on the two inputs. In forward-counting, the sequence of shifting binary numbers is in a clockwise direction, while in backward-counting, the sequence of shifting binary numbers is in a counterclockwise direction.

The 74HC4017BQ-Q100X also has a reset input which can be used to reset the counter to any count. This is done by setting the reset input to ‘1’ and then placing the desired count in the data inputs. This allows for multiple count sequences to be produced by the circuit.

The 74HC4017BQ-Q100X is a relatively simple piece of hardware that has many applications in a variety of fields. This circuit is able to count, as well as provide accurate timing, while maintaining low-power consumption and high-level performance in both forward- and backward-counting modes. As a result, it is one of the most widely used pieces of logic circuitry in modern industrial automation processes.

The specific data is subject to PDF, and the above content is for reference