74LCX241SJX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74LCX241SJX Application Field and Working Principle

The 74LCX241SJX is a high-speed, 8-bit buffer/line driver with 3-state outputs. This device is designed to provide high noise immunity and frequency performance up to 150 MHz. It operates from a single +5V power supply and can be used as both a bus driver and bus receiver in bus-oriented systems.

Application Field

The 74LCX241SJX is ideal for use in applications such as microprocessor and microcontroller based systems, high speed logic systems, networking and communication systems, multiplexers and demultiplexers, bus arbitrators, and fan-out buffers. Additionally, the 3-state outputs allow the device to be used in line drivers where the outputs can be connected to other devices in parallel.

Working Principle

The device features a tri-state output to minimize bus contention, allowing any report line to be disconnected from the bus without having to disconnect other devices from the bus. This ensures low power consumption and faster data transmission performance. The device also acts as a non-inverting buffer and is capable of driving 15 mA per output. The 74LCX241SJX has an on-board ESD protection diode array to protect against ESD voltages up to 2 kilovolts.

The inputs on the 74LCX241SJX are TTL compatible and are capable of transitioning to either high or low logic states. The device can accept signals as high as 5.5V and as low as 0.8V. The outputs have a high drive capability and a slew rate of 10ns. The output enables allows for all the outputs to be enabled or disabled, which can be useful in power saving applications.

Conclusion

The 74LCX241SJX is a useful device for high speed logic systems and networking applications. It is a fast buffer/line driver with 3-state outputs and provides high noise immunity and frequency performance up to 150 MHz. It operates from a single +5V power supply and uses a tri-state output to minimize bus contention. The device acts as a non-inverting buffer and is capable of driving 15 mA per output and an on-board ESD protection diode array to protect against ESD voltages up to 2 kilovolts.

The specific data is subject to PDF, and the above content is for reference