74LVC4066D-Q100J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVC4066D-Q100J is a digital analog switch IC (integrated circuit) specifically designed for use as an analog switch controlled by a CMOS logic signal. It is typically used in applications requiring the control of analog signals, such as audio/video switching, environmental control, or industrial process control systems.

This IC contains four independent single pole/double throw (SPDT) analog switches, each switch having an on resistance of 40 to 50 ohms when operated from 5 volts. The logic input for each switch has a hysteresis inherent in the input threshold, such that the switch will remain in the same state until a different logic level is applied. The switch can be used to connect either two sources or two loads to one end. The switches are also designed to work with other electronic components, such as transistors and integrators.

The 74LVC4066D-Q100J has two primary advantages for applications requiring the control of analog signals. First, its low drive requirements allow it to be driven with a wide variety of voltages, up to the maximum rating. This makes it ideal for applications where higher voltage signals need to be switched. Second, its switching rate is much faster than that of a standard mechanical switch, enabling the user to quickly change the connections while still avoiding significant signal distortion or degradation.

The 74LVC4066D-Q100J operates with a single +5V power supply. Its inputs are compatible with standard CMOS or TTL logic, and its output can drive 50mA loads. As such, it is ideal for use with a wide variety of analog signals, including audio, video, RS-232, and temperature, pressure, and humidity sensors. Additionally, its low power consumption makes it ideal for applications where space or power are limited.

The operation of the 74LVC4066D-Q100J is based on an on/off CMOS switch. Each switch has two inputs and one output. When a logic high voltage level is applied to one input and a logic low to the other, the switch is off and the output is low. Conversely, when a logic low voltage level is applied to one input and a logic high to the other, the switch is on and the output is high. This logic state can be held either statically (by inputting a low- or high-voltage level on both the inputs) or dynamically (by alternating the input signals).

The 74LVC4066D-Q100J is highly versatile and can be used to control a variety of analog signals. It is also well suited to audio/video switching, environmental controls, and industrial process control systems. Additionally, its features make it an ideal choice for applications where space or power is limited.

The specific data is subject to PDF, and the above content is for reference