ADG802BRM-1REEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG802BRM-1REEL is an interface device that is part of the larger group of analog switches, multiplexers, and demultiplexers. While all three component types employ similar electronic switching technologies, each fulfills a specific function in the larger circuitry.

An analog switch is a component that allows single or multiple channels to be switched on or off, usually in response to an electrical signal. This signal can come from a controller or be an input from a sensor. The most common application of an analog switch is in a circuit that has both an analog signal and a digital signal, allowing them to be controlled independently.

Multiplexers are used in circuits to enable the selection of one of a number of multiple inputs. When the multiplexer is in the off position, no signal is passed, but when the multiplexer is in the on position, one of the inputs is passed through to the output. Multiplexers are typically used to debug or troubleshoot circuits, as they allow for greater control over the individual components in the circuit.

Demultiplexers are the opposite of multiplexers, in that instead of combining multiple inputs into one, they split one input into multiple outputs. This is done by dividing the input into multiple "data" bits and then assigning each data bit to its own output. Demultiplexers are used in applications where a single digital signal needs to be divided into multiple analog signals.

The ADG802BRM-1REEL is a component that is designed to take multiple signals and route them to the appropriate analog and/or digital output. It contains eight individually controlled channels that can be used to route signals to either analog or digital outputs. The ADG802BRM-1REEL also supports both single-ended and differential signal input and output, allowing it to be used in both types of circuit schemes.

The ADG802BRM-1REEL has a maximum input voltage of 3.6V, which makes it suitable for use in circuits with both low-voltage and higher-voltage signals. It is also available in a small package size (8-pin SOIC) and requires only a single supply voltage for operation. Additionally, the component uses low-power CMOS technology, making it both efficient and reliable.

The ADG802BRM-1REEL can be used in a wide range of applications, including audio signal routing, signal switching, multiplexing, and demultiplexing. In audio signal routing applications, the component is used to route the audio signal from a digital signal processor to either an analog output or a digital output. In signal switching applications, it is used to selectively activate and deactivate different electrical signals. In multiplexing and demultiplexing applications, the component is used to route a signal from its input to multiple outputs and vice versa.

In summary, the ADG802BRM-1REEL is an interface component that is part of the larger family of analog switches, multiplexers, and demultiplexers. It can be used in applications that require signal routing, multiplexing, and demultiplexing. The component offers a low-voltage operating voltage of 3.6V and a small package size, making it suitable for a wide range of circuit applications.

The specific data is subject to PDF, and the above content is for reference