74LVC8T245PW,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVC8T245PW,118 is a type of Logic - Translators, Level Shifters, and is a transition voltage-level-shifting 8-bit transceiver. It’s most often used in the field of logic level translation, to be able to exchange data between two different voltage logic domains, such as those in CMOS,EMOS, and TTL logic families. This device is perfect for applications in communication interface and control bus interface. Furthermore, it can be used for data transmission between Electronic Control Unit (ECU) networks, and can achieve excellent performance in CAN, CAN-FD, and LIN applications.

The 74LVC8T245PW,118 contains two separate transceiver blocks powered by a voltage-shifting Feature. This feature allows it to translate the low power logic voltage of 2.5 to 3.6V to the medium power logic voltage of 4.5 to 5.5V. It also allows the opposite direction, from 4.5 to 5.5V to between 2.5 and 3.6V, and is controlled by an OE (Output Enable) signal. It also contains a PISO (Parallel In/Serial Out) and a SIPO (Serial In/Parallel Out) shift register, where the PISO provides an 8-bit parallel data output and the SIPO gives an 8-bit serial data input.

When working with the 74LVC8T245PW,118, it is also important to keep in mind its power dissipation. It has a junction temperature range of -40 to 125°C, and the maximum junction temperature (Tj) must not exceed the maximum rated junction temperature of 150°C. In addition, the permissible power dissipation (PD) should not exceed the maximum rated power dissipation of 3.7 W. As such, proper heat sinking techniques and practices should be employed to ensure proper operation of the device, and an appropriate heat sink should be selected in order to dissipate heat effectively.

In terms of its pins and pins, The 74LVC8T245PW,118 has 8 pins, an OE (Output Enable) pin, 8-bits input port, 8-bits output port, the voltage supply VCC, and the ground pin. The OE pin, which is the output enable pin, is used for data flow control. When it is set to logic low, the device will enter the low power mode and the data output will not be changed. Finally, the voltage supply pin is used to provide power to the circuit, and must be able to meet the required voltage level.

Last but not least, the working principle of the 74LVC8T245PW,118 is relatively simple. It is mainly used to transfer data between two different voltage logic domains. It contains two separate transceiver blocks which work together, in order to translate the low and medium power logic voltage between the two domains. The device is powered by a voltage-shifting feature, and contains an OE (Output Enable) pin which is used to control the flow of data. In addition, the device has an 8-bit input port and an 8-bit output port, and requires a proper heat sink be used in order to ensure proper operation of the device.

The specific data is subject to PDF, and the above content is for reference