74VHC4046N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74VHC4046N IC is an integrated circuit (IC) solution for regulating frequency, timing and clock-based requirements. It is primarily used in clocking applications, such as frequency synthesisers, phase-locked loops (PLLs), and clock generators. This IC can be used as a stand-alone or cascaded clock generator, as well as a PLL or frequency synthesizer.

The 74VHC4046N can be used to generate a wide range of frequencies with a high level of accuracy. The average accuracy is within ±2Hz of the nominal frequency, making it well-suited for precision timing application. The frequency range is typically 40 kHz to 40 MHz for the VCO frequency generated by the IC.

The 74VHC4046N is configured as a type of phase-locked loop (PLL). This is a common method of generating frequency and phase correct signals. A PLL works by phase-comparing an input signal with a reference signal. The output of the phase difference is an error signal that is used to frequency-lock the input signal to the reference signal. In this way, the 74VHC4046N can generate a frequency that is in sync with the input signal.

The 74VHC4046N contains all the necessary components to form a complete PLL circuit. This includes a Voltage Controlled Oscillator (VCO), a Frequency Detecter (FD), a Phase Comparator (PC), and a Charge Pump (CP). The VCO is the first component of the PLL and is responsible for generating an output signal based on an input frequency. The frequency of the signal will depend on the Voltage Controlled Oscillator’s control voltage.

The Frequency Detector (FD) then compares the input signal with the output signal from the voltage controlled oscillator. If the frequency of the signal from the VCO does not match the input frequency, then a signal is generated that is used to adjust the control voltage of the VCO. This signal is called the error signal.

The Phase Comparator (PC) then compares the phase of the input signal with the output signal from the VCO. If there is a discrepancy between the two signals, then a signal is generated that is used to adjust the control voltage of the VCO. This signal is called the phase correction signal.

Finally, the Charge Pump (CP) takes the error signal and the phase correction signal and combines them into an adjustment signal. This adjustment signal is then used to adjust the control voltage of the VCO, thus frequency-locking the input signal to the reference signal.

The 74VHC4046N is a versatile IC for producing reliable and highly-accurate frequencies for clocking applications. It can be used for numerous clock-based requirements that require compliance in both frequency and phase. Its wide frequency range and high-accuracy make it ideal for applications where precision timing or stability are key requirements.

The specific data is subject to PDF, and the above content is for reference