
Allicdata Part #: | 1949-1094-ND |
Manufacturer Part#: |
766A-10 |
Price: | $ 227.30 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | FIXED ATTENUATOR 10DB |
More Detail: | RF Attenuator 10dB 0Hz ~ 4GHz 20W N-Type In-Line... |
DataSheet: | ![]() |
Quantity: | 7 |
1 +: | $ 206.64000 |
10 +: | $ 193.72500 |
25 +: | $ 184.03900 |
Series: | 766A |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 4GHz |
Power (Watts): | 20W |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An attenuator is an electronic device used to reduce the power or amplitude of a signal without distorting the waveform. Attenuators are commonly used in RF (radio frequency) circuits to prevent overload or to adjust the power of a signal. The 766A-10 is a type of attenuator specially designed for use in RF applications. It is typically used for analog and digital terrestrial microwave applications, in SA-MTI systems (segmented automatic moving target identification systems), in regional and wide-area mobile communication systems, and in other commercial and military radio communications applications. This article will discuss the application field and working principle of the 766A-10.
Application Field
The 766A-10 attenuator is designed for use in a range of RF applications. It is ideal for use in digital and analog terrestrial microwave applications, as it has low insertion loss and excellent intermodulation performance. The device is also suitable for use in SA-MTI systems, regional and wide-area mobile communication systems, and commercial and military radio communication systems. Its narrowband performance also makes the 766A-10 a great choice for use in narrowband systems.
Working Principle
The 766A-10 attenuator works by reducing the power or amplitude of a signal without distorting the waveform. The device uses two RF networks to reduce the signal power. The first network is composed of a series of inductors and capacitors, while the second network is composed of resistors. Both networks are adjusted so that the impedance of the device matches the impedance of the output device. The signal is then passed through the two networks, which result in a reduction in the signal power.
Conclusion
The 766A-10 is a type of attenuator specially designed for use in RF applications. It is typically used for analog and digital terrestrial microwave applications, in SA-MTI systems, in regional and wide-area mobile communication systems, and in other commercial and military radio communications applications. The 766A-10 attenuator works by reducing the power or amplitude of a signal without distorting the waveform. It uses two RF networks to reduce the signal power, and its narrowband performance makes it a great choice for use in narrowband systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
766A-6 | L3 Narda-MIT... | 255.02 $ | 5 | FIXED ATTENUATOR 6DBRF At... |
766A-20 | L3 Narda-MIT... | 227.3 $ | 1000 | FIXED ATTENUATOR 20DBRF A... |
766A-30 | L3 Narda-MIT... | 266.11 $ | 8 | RF ATTENUATOR 30DB NTYPE ... |
766A-3 | L3 Narda-MIT... | 255.02 $ | 2 | FIXED ATTENUATOR 3DBRF At... |
766A-10 | L3 Narda-MIT... | 227.3 $ | 7 | FIXED ATTENUATOR 10DBRF A... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...

RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...

RF ATTENUATOR 1DB SMA MODULERF Attenuato...

RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...

RF ATTENUATOR 6DB 50OHM SMARF Attenuator...

RF ATTENUATOR 7DB SMA MODULERF Attenuato...
