Allicdata Part #: | 1949-1096-ND |
Manufacturer Part#: |
766A-3 |
Price: | $ 255.02 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | FIXED ATTENUATOR 3DB |
More Detail: | RF Attenuator 3dB 0Hz ~ 4GHz 20W N-Type In-Line ... |
DataSheet: | 766A-3 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 231.84000 |
10 +: | $ 217.35000 |
25 +: | $ 206.48200 |
Series: | 766A |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 3dB |
Frequency Range: | 0Hz ~ 4GHz |
Power (Watts): | 20W |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices used in electronic systems to reduce the power of a signal without distorting its waveform. The 766A-3 attenuator is a three-pole, high-frequency attenuator used in a variety of applications. It is typically used to reduce signal intensity to a lower-media level, such as when a signal is reduced for analysis or protection of a device. The 766A-3 has a frequency range of 5 to 3000 MHz and can handle signals up to 50 Watts.
The most common application for the 766A-3 is attenuation of radio frequency components or signals. It can be used to provide protection from high-powered signals, such as those emitted from a transmitting antenna. It can also be used for attenuation on a receiving antenna, allowing only the desired signals to be received. The 766A-3 can be used in a wide variety of radio frequency applications, including broadcast television and radio transmitters, cellular phone systems, and satellite communication systems.
The 766A-3 attenuator is designed with high accuracy and repeatability, which make it well-suited for use in test and measurement applications. It is also highly reliable and has a low VSWR, which helps prevent undesired reflections from occurring. Additionally, it has a wide temperature range and is suitable for use in a wide range of environments.
The 766A-3 is designed with three concentric elements, each one with a different impedance. The outermost element has the lowest impedance and typically provides the most attenuation. The middle element provides the intermediate level of attenuation, while the innermost element has a higher impedance and provides the smallest amount of attenuation.
A unique feature of the 766A-3 is the ability to adjust the attenuation level by rotating the top element. The rotation of this element changes the position of the innermost element, thus allowing for a wide range of attenuation levels.\
The 766A-3 attenuator is a versatile and reliable attenuator that can be used in a wide range of applications. It is designed for high accuracy and repeatability, and has a wide temperature range and low VSWR. Its three-element design allows for a wide range of attenuation levels, which makes it ideal for use in test and measurement applications, as well as various radio frequency applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
766A-30 | L3 Narda-MIT... | 266.11 $ | 8 | RF ATTENUATOR 30DB NTYPE ... |
766A-10 | L3 Narda-MIT... | 227.3 $ | 7 | FIXED ATTENUATOR 10DBRF A... |
766A-6 | L3 Narda-MIT... | 255.02 $ | 5 | FIXED ATTENUATOR 6DBRF At... |
766A-3 | L3 Narda-MIT... | 255.02 $ | 2 | FIXED ATTENUATOR 3DBRF At... |
766A-20 | L3 Narda-MIT... | 227.3 $ | 1000 | FIXED ATTENUATOR 20DBRF A... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...