7WB3126MUTAG

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Bus Switch
Circuit:	1 x 1:1
Independent Circuits:	2
Current - Output High, Low:	--
Voltage Supply Source:	Single Supply
Voltage - Supply:	4 V ~ 5.5 V
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	8-UFDFN
Supplier Device Package:	8-UDFN (1.8x1.2)
Base Part Number:	7WB3126

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Signal Switches, Multiplexers, Decoders

Signal switches and multiplexers, as well as decoders, are important components in the field of digital electronics. Such devices enable gate and signal level conversion, as well as providing for data manipulation, and are an essential part of any system that must exchange digital signals between components. 7WB3126MUTAG is a type of signal switch, multiplexer and decoder IC which has a wide range of applications. This article examines the functionality of the 7WB3126MUTAG and explains its application fields and working principle.The 7WB3126MUTAG is a logic gate switch, multiplexer and decoder, which has primary applications in multiplexing and interfacing circuits. It is designed in such a way that it can connect the output to any one of the inputs, thereby switching the signals, or it can connect the outputs to all of the inputs, thus demultiplexing the signals. The 7WB3126MUTAG can operate in either a demultiplexing or multiplexing mode, depending on the signals it receives.The 7WB3126MUTAG is a three-input, eight-output device. The three input signals are S1 (enable), S2 (inverted enable), and E (enable), while the eight outputs are DO0 through DO7. The S1 and S2 input signals are used to control the selection of the output, while the E input is used to enable or disable the device. When the E input is low the device is enabled and when it is high it is disabled.The 7WB3126MUTAG operates in two modes – multiplexing and demultiplexing. In multiplexing mode, the three-input signals (S1, S2, and E) are used to select the desired output from the eight outputs (DO0 - DO7). The device multiplexes data from the inputs to the output by selecting the appropriate output based on the specified input conditions. In demultiplexing mode, the three input signals (S1, S2 and E) are used to select the desired inputs from the eight outputs (DO0 - DO7). The three input signals select the appropriate input to be connected to the output, thus demultiplexing the data from the outputs.When in multiplexing mode, the 7WB3126MUTAG can switch the output of one device to the input of another, allowing for a high speed digital signal connection to be made between the two devices. In demultiplexing mode, the device can be used to separate one digital signal into multiple signals, which can then be input to separate devices. The device can also be used to control peripheral signals, such as LEDs and motors, by selecting the desired output and then providing a digital signal to the peripheral device.The 7WB3126MUTAG is also suitable for data and logic manipulation. By connecting the appropriate input signals, the device can be used to implement logical functions such as OR, AND, XOR, as well as useful combination logic functions such as NAND, NOR and XNOR.The 7WB3126MUTAG belongs to the category of logic switches, multiplexers and decoders. These devices enable gate and signal level conversion, as well as providing for data manipulation. The 7WB3126MUTAG has a wide range of applications, from interfacing and data manipulation to switching and multiplexing. Its ability to easily switch between multiplexing and demultiplexing modes, makes it an ideal device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description