Allicdata Part #: | 80F20K-ND |
Manufacturer Part#: |
80F20K |
Price: | $ 1.90 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 20K OHM 10W 1% AXIAL |
More Detail: | 20 kOhms ±1% 10W Through Hole Resistor Axial Wire... |
DataSheet: | 80F20K Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 1.72462 |
Series: | Acrasil® 80 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 20 kOhms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.843" L (10.30mm x 46.80mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are components whose primary function is to generate or displace electrical current in circuits. These resistors have been around since the early 1950s and are often used in consumer electronics, computers, mobile communication devices, and many other less commonly used applications.
A 80F20K application field and working principle, specifically, is an element used in electronic circuits to create a constant resistance. This resistance is typically around 20,000 Ohms. This type of resistor is a so-called "through hole" resistor, meaning that it has two legs that are inserted into the circuit board before it is soldered together. Other types of resistors, such as surface mount resistors, do not require the legs to be pushed through the circuit board.
The construction of the 80F20K through hole resistor is typically comprised of a core material that has resistive qualities. This core material is usually carbon or metal film, and the resistive value is usually printed onto the body. The body is usually composed of a ceramic or epoxy material, to provide further protection and insulation. The legs of the resistor are usually stamped out of metal.
The 80F20K resistor is basically an electrical device that is used to convert electrical energy into heat energy through the process of electrical resistance. This type of resistor is commonly used to provide a constant voltage or current level to electrical circuits such as audio amplifiers and power supplies. It can also be used to limit the current flow within a given circuit. The resistance value of the resistor determines how much current it will allow to pass through it.
The 80F20K through hole resistor can be used in various electronic applications, ranging from simple circuits to complex circuits. It can even be used in communications systems to send signals over long distances. This type of resistor is also used in numerous high-power devices and can be used in power conditioners to regulate the current flowing in a circuit.
When using an 80F20K through hole resistor in a circuit, it is important to make sure that the resistor is properly installed. This is because a wrong connection may cause the resistor to heat up and potentially cause a short circuit. If a short circuit occurs, the resistor can be easily damaged and can cause a dangerous situation. It is also important to make sure that the voltage of the resistor matches the voltage of the circuit in which it is used, as too much voltage can damage the resistor.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...