Allicdata Part #: | 80F2R0-ND |
Manufacturer Part#: |
80F2R0 |
Price: | $ 1.35 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 2 OHM 10W 1% AXIAL |
More Detail: | 2 Ohms ±1% 10W Through Hole Resistor Axial Wirewo... |
DataSheet: | 80F2R0 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 1.22850 |
Series: | Acrasil® 80 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 2 Ohms |
Tolerance: | ±1% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.406" Dia x 1.843" L (10.30mm x 46.80mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
。Through Hole Resistors are devices that are used to control the flow of electrical currents in electrical and electronic circuits. They are an important part of any electrical or electronic system, and the 80F2R0 is a common type of through hole resistor. This article will discuss the application field and working principle of 80F2R0 resistors.
The 80F2R0 resistors are widely used in electronic circuits and systems due to their reliable and consistent performance. This type of resistor is usually used for voltage and current regulation, noise cancellation, or signal conditioning. It is also commonly used in high voltage circuits, as it is able to withstand voltage spikes without any damage to the device.
The construction of an 80F2R0 resistor is relatively simple. It consists of a cylinder shaped ceramic body with two end caps. Inside the cylinder is an insulated wire coil, known as a helix or bobbin. The helix is wound in a spiral pattern, and is comprised of high quality epoxy-molded plastic. This helix is then enclosed in an air-tight, waterproof casing.The construction of the 80F2R0 resistor provides it with a number of advantages over other types of resistors. The ceramic body is highly resistant to thermal shock and physical stress, making it ideal for applications in extreme environmental conditions. The helix is protected from direct contact with the environment, allowing it to maintain its electrical characteristics for an extended period of time. Additionally, the construction ensures a high degree of accuracy, allowing the resistor to produce consistent results in all conditions.
The working principle of the 80F2R0 resistor is based on Ohm\'s law. Ohm\'s law states that the current through a conductor is equal to the voltage applied across it, divided by the resistance of the conductor. In the case of a resistor, the resistance is determined by the amount of material used and the type of construction. The 80F2R0 resistor uses a combination of its header and its helix to control the amount of current that can flow through it. By appropriately adjusting the amount of material used and the number of turns in the helix, the resistance of the resistor can be accurately controlled.
In conclusion, the 80F2R0 resistor is a reliable and versatile component that is widely used in electronic and electrical circuits. It is easy to install, and its dependable performance makes it a popular choice for a variety of applications. Its construction of a ceramic body and helix provides it with improved accuracy and durability, and its working principle makes it easy to control the amount of current flowing through it.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...