81044/12-26-0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Conductor Cables (Hook-Up Wire)

The type 81044/12-26-0 single conductor cable is often used in electronic and electrical applications, as well as in telecommunications. The hook-up wire is single-core, meaning that only one conductor runs inside the cable – shielding is not available. Its main application is for high-frequency, constant voltage use, but it may be used in applications below 1KV without needing any special fire protection.

The insulated cable consists of a soft annealed copper conductor which is covered with a cross-linked polyethylene insulation. The insulation colour is yellow and has an overall diameter of approximately 2 mm. It has a rated voltage of 300/500V or 600/1000V and is flame retardant and halogen free. The cable is rated for temperatures up to +127°C and is also resistant to oil, gas, petrol, and a variety of chemicals.

The 81044/12-26-0 cable is flexible, making it easy to work with. It can be cut to length, coiled, or twisted, and can be crimped and soldered for fastening. It is suitable for use in high-frequency circuits such as automotive, telecommunications, and CCTV. It can also be used for factory wiring and instrumentation, control and automation of machines, signal transmission, or any other application requiring high-frequency wiring.

The working principle of the type 81044/12-26-0 single conductor cable is the same as that of any other single conductor cable, with the main distinction between them being the type of insulation used. Single conductor cables are mainly used for low-voltage applications and consist of a single conductor surrounded by insulation. The insulation must be tough enough to withstand the voltage and current conditions in order to ensure safety. The insulation protects the cable from heat, water, and other environmental factors, and must also be able to resist electrical breakdown.

The type 81044/12-26-0 single conductor cable has a voltage rating of 300/500V or 600/1000V, meaning it can be used in a variety of electronic and electrical applications. The cable is relatively low-cost and easy to work with, making it a popular choice for many applications. The cable is also flame-retardant, halogen-free, and resistant to oil, gas, and other chemicals, making it suitable for use in a variety of environments.

The type 81044/12-26-0 single conductor cable is popular for a range of applications, from automotive and telecommunications to CCTV and factory wiring. Its robust construction and wide temperature range make it suitable for use in a variety of environments. Its single-core construction is suitable for high-frequency use, and its insulation is tough enough to handle voltage and current conditions, making it safe for use in a range of applications.

The specific data is subject to PDF, and the above content is for reference