81735011

Connection Method:	Push-In Connection for Tubing 5/32" (4.00mm) Dia
Weight:	0.077 lb (34.93g)
Approvals:	--
Mechanical Life:	1,500,000 Cycles
Operating Temperature:	-5°C ~ 50°C
Ingress Protection:	--
Features:	Operating Force 8 ~ 18N
Mounting Type:	Rod Mount
For Use With/Related Products:	--
Series:	--
Fluid Type:	Air, Inert Gas
Orifice Diameter:	0.106" (2.70mm)
Operating Pressure:	30 ~ 116 PSI (2 ~ 8 bar)
Actuator Type:	Pushbutton
Function:	3/2 Normally Open
Type:	Control Valve, Momentary
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pneumatics

Pneumatics is the technology of using compressed air or a combination of compressed air and certain gases to power machines and tools. It is most commonly used in applications such as driving motors, controls, or valves. Pneumatic systems are used to control a wide range of machines and equipment, such as motor vehicles, factory machines, and automated manufacturing systems.Pneumatic systems typically use compressed air as a source of power. Compressed air is created by compressing or pressurizing air to increase its density, creating pressure, and forcing air into a storage tank or piping system. This increases the volume and pressure of the air. To maintain the pressure of the stored air, a pressure-reducing valve is installed.That stored air is then used to power a variety of machines and tools. A simple example of a pneumatic system is a car\'s brakes. When the driver presses down on the brake pedal, it causes a valve in the brake lines to open, allowing compressed air to flow through and activate the brakes. As long as pressure is maintained on the pedal, the brakes remain activated.

Hydraulics

Hydraulics is the technology of using liquids to transmit power from one point to another. It is probably the most common form of power transmission. Hydraulics is commonly used to operate lifts, elevators, bulldozers, rigs, and other machinery.In a basic hydraulic system, a liquid (usually oil) is used to transmit the power from one point to the other. The liquid is pressurized by a pump, causing it to move through a pipe or tube to a valve. The valve redirects the liquid to the other end, where the force from the liquid is applied.A simple example of a hydraulic system is an automobile\'s brake system. When the driver presses the brake pedal, it causes a master cylinder to pressurize the brake fluid. The pressurized fluid then flows through the brake lines to the brake calipers, which apply force to the brakes, slowing the car down.The 81735011 application field and working principle is used most often in either a pneumatic or hydraulic system. In a pneumatic system, it is used to operate a motor, valve, or other device, while in a hydraulic system it is used to control the pressure and direction of the fluid to move the device. For example, a motor could be operated using compressed air, while a bulldozer could be operated using pressurized hydraulic fluid.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description