82CNQ030S2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic semiconductor devices designed to allow current flow in one direction only. Rectifiers are a type of diode used to convert alternating current (AC) to direct current (DC). Arrays are an assembly of multiple diodes, typically arranged in a pattern, used to control current direction in a circuit. The 82CNQ030S2 is a single-phase, surface mount Schottky rectifier array with 3 terminals and 30 Amps per terminal. It is specifically designed for high frequency, low to moderate power, switch-mode rectification.

The 82CNQ030S2 is commonly used in the automotive, computer, and consumer electronics industries. It is suitable for applications with a supply voltage of up to 30 volts and a continuous forward current of 30 Amps. In automotive applications, diodes and rectifier arrays like the 82CNQ030S2 are used to convert AC voltage from an alternator to DC voltage to power electrical components. The 82CNQ030S2 is also used in the protection circuits of choice automotive ignition systems.

The 82CNQ030S2’s primary function is its ability to convert AC to DC. This is accomplished via a process known as rectification. The 82CNQ030S2 performs rectification using a combination of the Schottky Barrier principle, which utilizes a metal-semiconductor junction or “Schottky barrier” to facilitate a very low forward voltage drop, and discrete diode construction, which allows for current to flow in one direction only. Through these two mechanisms, the 82CNQ030S2 is able to reduce losses in the conversion process, thus increasing system efficiency.

The 82CNQ030S2 also comes with built-in features for protection and fault detection. It features an unlimited on-state current rating and built-in over-temperature protection to ensure that it does not exceed its temperature operating limit and be damaged. Additionally, it has an option for an integrated fault detection circuit to detect faults such as over-voltage or over-current, which can be programmed to trigger a system shutdown in the event of a defect or other issue.

In conclusion, the 82CNQ030S2 is a single-phase, surface mount Schottky rectifier array. It is designed for high frequency, low to moderate power, switch-mode rectification and is used for applications with a supply voltage of up to 30 volts and a continuous forward current of 30 Amps. Its primary function is to convert AC to DC via rectification, and it has built-in features for protection and fault detection. It is commonly used in the automotive, computer, and consumer electronics industries.

The specific data is subject to PDF, and the above content is for reference