84140801

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are a specialized form of electromechanical relays, one of the most widely used relays. An SSR is an electrical switching device that routes an electrical current from one device to another through an electronically regulated switch. Unlike a traditional mechanical relay, an SSR requires no mechanical contact, which makes it much quieter and eliminates the need for frequent servicing and maintenance. An SSR is typically used for the control of advanced, high-power switching applications, as their capabilities for switching high electrical currents and voltages make them ideal for these purposes.

The 84140801 SSR is a particular type of SSR which is designed for the control of high-power switching applications. It is a contact-less, solid state relay with a rated input power of 400V and a maximum current of 20A. It operates in two modes, normally open (NO) and normally closed (NC), and is controlled by a pilot signal voltage applied to the control port of the device. The output voltage is determined by the application circuit. The 84140801 can also be used in other applications, such as low-frequency control of motors, pumps, and cooling fan systems.

The working principle of an 84140801 SSR is based on electrically, rather than mechanically switching AC loads. When the control port of the SSR receives a pilot signal voltage, it switches the SSR on or off, depending on the mode of operation. The main benefits of using an SSR over a mechanical relay are the lack of physical contact wear and tear, the longer life expectancy, and the ability to switch very high voltages and currents without any arcing.

The 84140801 SSR is designed to operate in the frequency range from 40 to 60Hz, and can be used in both AC and DC applications. The maximum AC operating voltage is 400V and the maximum current is 20A. The device is designed with a low input power to ensure a long life and minimize system losses. The device is also designed to have a wide temperature operating range from -40°C to +85°C.

When using an SSR in a system, it is necessary to ensure that the control signal is strong enough to switch the SSR off, even if there is a large voltage or current difference between the power source and the load. This can be done by selecting a SSR with a high control voltage and/or current rating. In addition, it is important to check the input and output wiring for correct polarity, and to ensure that all connections are firmly secured.

In summary, the 84140801 is a contact-less, solid state relay designed for high-power switching applications, and operates in two modes, either normally open or normally closed. Its rated input power is 400V and its maximum current is 20A. Its low input power ensures a long life and minimized system losses, while its wide temperature range makes it suitable for most environmental conditions. By paying close attention to the specifications of the device, and ensuring that all connections are secure, this type of SSR can be used for a variety of switching applications.

The specific data is subject to PDF, and the above content is for reference