
Allicdata Part #: | 854324-1-ND |
Manufacturer Part#: |
854324-1 |
Price: | $ 381.50 |
Product Category: | Tools |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | HOLD DOWN, TUBE |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 346.81500 |
Specifications
Series: | * |
Part Status: | Active |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The number 854324-1 is almost certainly referring to a device within the category of crimpers, applicators, and presses - accessories. This type of accessory can be used for a wide variety of applications, though its primary purpose is to join or separate two pieces of material. It consists of two halves which, when pressed together, can connect, attach, or cut something. The specifics of how this type of accessory works will depend on the specific type being used.
The most common type of the accessories in the 854324-1 category are the electrical crimpers. An electrical crimper is used to make electrical connections, such as connecting wires or other conductive materials, by joining them together. It does so by creating an electrical conduit with two ends, which are wrapped around the two corresponding pieces of material. The device is held together with a mechanical clamp, such as a pair of pliers or a screwdriver, and pressure is applied in order to complete the connection. Once the connection has been secured, the clamp is released, and the connection is complete.
The type of crimp used will depend on the specific application and the type of electrical connection being made. Crimps can be made of many different materials, such as metal, plastic, and rubber, and come in a variety of sizes. They are most often used for joining wires, but can also be used to joint any type of electrical component, such as resistors, capacitors, and diodes.
The second type of accessory in the 854324-1 category is the applicator. This type of device is used for attaching various objects to a substrate. The substrate can be anything from a piece of material, such as metal, wood, or stone, to an electronic device or an impressionable surface. The object that is being attached may be a coin, a battery, or something else. The applicator consists of two halves which, when pressed together, create an adhesive layer between the two parts. This adhesive layer acts as a bond which connects the two materials, making them a single piece.
The third type of accessory in the 854324-1 category is the press. A press is essentially a tool with two moving parts which, when pressed together, can create an impression on a piece of material. This can be used for a number of applications, such as joining material, forming impressions, or cutting objects. Presses come in many different sizes and shapes and can be used for a range of tasks, including crimping, forming, and cutting.
The fourth type of accessory in the 854324-1 category is the cutters. These are a type of press which is designed specifically to make clean, precise cuts in material. Cutters are commonly used for cutting wire, sheet metal, plastics, or cardboard. They come in various sizes and shapes and are generally limited in the amount of material they can cut.
The fifth type of accessory in the 854324-1 category is the punchers. Punches are a type of press which is specifically designed to make holes in material. They come in various sizes and shapes and are usually limited in the number of holes they can make. Punches are often used to make holes in metal, wood, plastic, and other materials.
The sixth type of accessory in the 854324-1 category is the strippers. These are specialized tools which are used to strip away insulation, tape, or other protective layers from electrical wires or components. They come in a variety of sizes and shapes and are generally designed to easily remove only the desired material.
The seventh type of accessory in the 854324-1 category is the tempers. Tempers are tools which are used to bend and shape metal pieces, such as rods, wires, or rivets. They come in various sizes and shapes and are used to make intricate or specific shapes in metal pieces.
These are the seven types of accessories in the 854324-1 category and each of them plays an important role in the electrical, manufacturing, and construction industries. Depending on the specific application and desired outcome, each of these accessories can be used in a wide variety of situations.
The most common type of the accessories in the 854324-1 category are the electrical crimpers. An electrical crimper is used to make electrical connections, such as connecting wires or other conductive materials, by joining them together. It does so by creating an electrical conduit with two ends, which are wrapped around the two corresponding pieces of material. The device is held together with a mechanical clamp, such as a pair of pliers or a screwdriver, and pressure is applied in order to complete the connection. Once the connection has been secured, the clamp is released, and the connection is complete.
The type of crimp used will depend on the specific application and the type of electrical connection being made. Crimps can be made of many different materials, such as metal, plastic, and rubber, and come in a variety of sizes. They are most often used for joining wires, but can also be used to joint any type of electrical component, such as resistors, capacitors, and diodes.
The second type of accessory in the 854324-1 category is the applicator. This type of device is used for attaching various objects to a substrate. The substrate can be anything from a piece of material, such as metal, wood, or stone, to an electronic device or an impressionable surface. The object that is being attached may be a coin, a battery, or something else. The applicator consists of two halves which, when pressed together, create an adhesive layer between the two parts. This adhesive layer acts as a bond which connects the two materials, making them a single piece.
The third type of accessory in the 854324-1 category is the press. A press is essentially a tool with two moving parts which, when pressed together, can create an impression on a piece of material. This can be used for a number of applications, such as joining material, forming impressions, or cutting objects. Presses come in many different sizes and shapes and can be used for a range of tasks, including crimping, forming, and cutting.
The fourth type of accessory in the 854324-1 category is the cutters. These are a type of press which is designed specifically to make clean, precise cuts in material. Cutters are commonly used for cutting wire, sheet metal, plastics, or cardboard. They come in various sizes and shapes and are generally limited in the amount of material they can cut.
The fifth type of accessory in the 854324-1 category is the punchers. Punches are a type of press which is specifically designed to make holes in material. They come in various sizes and shapes and are usually limited in the number of holes they can make. Punches are often used to make holes in metal, wood, plastic, and other materials.
The sixth type of accessory in the 854324-1 category is the strippers. These are specialized tools which are used to strip away insulation, tape, or other protective layers from electrical wires or components. They come in a variety of sizes and shapes and are generally designed to easily remove only the desired material.
The seventh type of accessory in the 854324-1 category is the tempers. Tempers are tools which are used to bend and shape metal pieces, such as rods, wires, or rivets. They come in various sizes and shapes and are used to make intricate or specific shapes in metal pieces.
These are the seven types of accessories in the 854324-1 category and each of them plays an important role in the electrical, manufacturing, and construction industries. Depending on the specific application and desired outcome, each of these accessories can be used in a wide variety of situations.
The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "8543" Included word is 40
Part Number | Manufacturer | Price | Quantity | Description |
---|
854384-1 | TE Connectiv... | 165.42 $ | 1000 | GEAR, GRIPPER |
854375-1 | TE Connectiv... | 147.16 $ | 1000 | MALE, PUSHROD |
854339-1 | TE Connectiv... | 197.65 $ | 1000 | GRIPPER, RIGHT |
854389-1 | TE Connectiv... | 0.69 $ | 1000 | TIP, INSERTER, CHAMP |
854335-1 | TE Connectiv... | 185.83 $ | 1000 | GRIPPER, STACKER |
8543 | Keystone Ele... | 12.19 $ | 1000 | KNOB KNURLED 0.250" ALUMI... |
854363-1 | TE Connectiv... | 456.34 $ | 1000 | AIR VALVE ASSEMBLY |
854321-1 | TE Connectiv... | 48.3 $ | 1000 | PIN, PIVOT |
M80-8543445 | Harwin Inc. | 2.84 $ | 1000 | CONN MALE DIL VERT THConn... |
8543BGI-09LFT | IDT, Integra... | 0.0 $ | 1000 | IC CLK BUFFER 2:4 650MHZ ... |
854385-1 | TE Connectiv... | 257.8 $ | 1000 | BRACKET, REEL SUPPORT |
854356-1 | TE Connectiv... | 517.5 $ | 1000 | BLOCK, GEAR GRIPPER |
854340-1 | TE Connectiv... | 198.72 $ | 1000 | GRIPPER, LEFT |
854329-2 | TE Connectiv... | 413.72 $ | 1000 | MOUNT, ELEVATOR SWITCH |
854316-1 | TE Connectiv... | 88.05 $ | 1000 | JACKSCREW, EJECT ELEVATOR |
8543BGILFT | IDT, Integra... | -- | 1000 | IC CLK BUFFER 2:4 650MHZ ... |
854319-1 | TE Connectiv... | 354.47 $ | 1000 | YOKE, DRIVE |
8543BGLFT | IDT, Integra... | -- | 1000 | IC CLK BUFFER 2:4 800MHZ ... |
075-8543-000 | ITT Cannon, ... | 0.0 $ | 1000 | KPSE GASKET 8 |
854309-1 | TE Connectiv... | 65.18 $ | 1000 | GUARD, CONVEYOR SIDE |
854328-1 | TE Connectiv... | 83.48 $ | 1000 | SCREW, VERTICAL ADJUSTMEN... |
854323-1 | TE Connectiv... | 180.46 $ | 1000 | ARM, GRIPPER |
854324-1 | TE Connectiv... | 381.5 $ | 1000 | HOLD DOWN, TUBE |
854300-1 | TE Connectiv... | 8.32 $ | 1000 | EJECT ASSY |
854323-2 | TE Connectiv... | 151.46 $ | 1000 | ARM, GRIPPER |
854305-1 | TE Connectiv... | 470.9 $ | 1000 | DRIVER |
854359-1 | TE Connectiv... | 83.48 $ | 1000 | PLATE, GEAR GRIPPER |
85439D | 16.07 $ | 1000 | WR COMB INDEX 9MMCombinat... | |
854308-1 | TE Connectiv... | 74.33 $ | 1000 | SHAFT/IDLER |
8543BGLF | IDT, Integra... | 15.17 $ | 100 | IC CLK BUFFER 2:4 800MHZ ... |
8543BGLF-HT | IDT, Integra... | 0.0 $ | 1000 | IC CLK BUFFER 2:4 800MHZ ... |
8543BGI-09LF | IDT, Integra... | 0.0 $ | 1000 | IC CLK BUFFER 2:4 650MHZ ... |
854315-1 | TE Connectiv... | 61.75 $ | 1000 | CLEVIS, JACKSCREW |
854373-1 | TE Connectiv... | 415.7 $ | 1000 | PLATE, GUIDE |
8543820000 | Weidmuller | 199.4 $ | 1000 | COND SGNL 35/32 J/K/T/E/N... |
854320-1 | TE Connectiv... | 0.69 $ | 1000 | PIVOT, FAR SIDE |
854362-1 | TE Connectiv... | 1.39 $ | 1000 | CONTROL VALVE ASSY |
075-8543-002 | ITT Cannon, ... | 0.0 $ | 1000 | KPSE GASKET 12 |
075-8543-027 | ITT Cannon, ... | 0.0 $ | 1000 | TRI GASKET FLANGED |
8543BGLFT-HT | IDT, Integra... | 0.0 $ | 1000 | IC CLK BUFFER 2:4 800MHZ ... |
Latest Products
0192290082
RETAINER PLATE/STRIP CUTOFF

630047-GB
GAGE PIN ASSEMBLY

614929
LOCATOR MINI EJECTOR

1585699-6
MEP-6T TOUCH SCREEN/MESSAGE SYST

4-58200-8
SEATING TI ASSEMBLY

1-1804791-6
INSET TL ASSY 5 PR 14 COLUMN
