86-300G-RT

Series:	--
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	300 PSI (2068.43 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 100 mV
Accuracy:	±0.1%
Voltage - Supply:	--
Port Size:	--
Port Style:	No Port
Features:	Temperature Compensated
Termination Style:	Cable with Connector
Maximum Pressure:	900 PSI (6205.28 kPa)
Operating Temperature:	-40°C ~ 125°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers

Pressure sensors and transducers are essential in many industrial activities and medical applications. They are used to measure pressure in liquids, gases, and solids. In the modern world, pressure sensors and transducers are becoming increasingly important for measuring temperature, humidity, and other physical parameters.The 86-300G-RT is a specific type of pressure transducer. This type of transducer uses a strain gauge based technology that is built on a steel diaphragm and is connected in a Wheatstone bridge circuit. This pressure transducer is suitable for low pressure and medium pressure applications. It is designed for operation in general industrial applications.The 86-300G-RT pressure transducer provides accurate and stable output signals in response to pressure changes. It uses a capacitive sensing element design which allows for long life and high accuracy. The 86-300G-RT is composed of a pressure sensing diaphragm, a strain gauge, and a Wheatstone bridge circuit that transmits the voltage output signal corresponding to the pressure. The pressure sensing diaphragm is the key component of the 86-300G-RT pressure sensor. This diaphragm is a thin membrane that is exposed to the measured pressure from the outside. The diaphragm deforms according to the pressure applied, and this deformation is measured and then converted to an electrical signal. The strain gauge attached on the diaphragm is the element responsible for the conversion of the mechanical deformation into electrical signal.The Wheatstone bridge is used to measure the resistance of the strain gauge on the diaphragm. The bridge is composed of four resistors, measuring the resistance changes and connecting them in a Wheatstone bridge. The Wheatstone bridge is the component responsible for amplifying the electrical signal from the strain gauge. The output signal of the 86-300G-RT is a voltage signal that is linearly proportional to the pressure applied. The signal can be either 4-20 mA or 0-5 Vdc, depending on the configuration. This signal can be sent to a digital panel meter, or it can be connected to a digital data acquisition system for further processing.The 86-300G-RT pressure transducer has a wide range of applications. It is suitable for applications such as tank level and pressure measurements, control and regulation of air, water and non-aggressive liquids, and many others. It is also useful for measuring the pressure of gases such as air or steam. The 86-300G-RT is particularly useful as a process parameters monitor in medical applications, and in measuring the pressure of oxygen and other medical gases in hospitals and other health care facilities.The 86-300G-RT is a reliable and accurate pressure transducer that can be used in many different applications. It is designed to be used in extreme environments and to withstand high and low temperatures, pressure, and other conditions. This makes it ideal for use in the most demanding applications. The 86-300G-RT is robust and easy to install and use, and its output signal can be easily interfaced with analog, digital and PLC control systems.Overall, the 86-300G-RT pressure transducer is an excellent choice for any application that requires accurate and reliable pressure measurements. It is suitable for a variety of industrial and medical applications, and its robust construction and ease of use make it a great choice for any application.

The specific data is subject to PDF, and the above content is for reference