8607760000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State relays (SSRs) are widely used in industrial and commercial applications where non-contact operation is desired. They are particularly popular due to their reliability and their operating efficiency. SSRs are comprised of three main components, an input circuit, a switch, and an output circuit. The primary function of an SSR is to isolate the input circuitry from the output circuitry, providing added protection against arcing and overloading.

The 8607760000 SSR is a zero-crossing, zero-voltage-switching (ZVS) type of device, meaning that the transition from an “off” to an “on” state takes place at zero voltage and with virtually no overshoot or ringing. This feature makes the 8607760000 well suited for powering circuit motor load or load with high inrush currents. The 8607760000 is rated up to 40 Amps and operates at 25Vac or Vdc, making it ideal for a wide range of industrial applications.

The 8607760000 has two power supplies: one to control the input circuitry and one to power the output circuit. It operates by sensing the current flowing through the input circuitry and detects when the current reaches a certain threshold. When this threshold is exceeded, the switch within the SSR is activated and the output circuit is enabled. The 8607760000 can switch up to 40 amps and has a noise immunity of up to 1kVac.

The 8607760000 features built-in snubber network, which greatly reduces the effect of electrical noise during switching. This snubber network is designed to minimize arcing across the SSR contacts while maintain high switching accuracy. The 8607760000 also has a built-in heat sink with a thermally conductive base plate that helps to radiate heat away from the device, thus preventing overheating.

In order for an SSR to work properly, power must be supplied to both the input and output circuits. For the 8607760000, the input current must range from 0 to 10mA and the output current must be greater than 2Amp. Additionally, the device should be mounted in an approved enclosure. This enclosure should be large enough to contain the SSR and any accompanying cables as well as provide sufficient cooling for the unit.

The 8607760000 is ideal for applications requiring reliable non-contact switching and high current ratings. It is a great choice for a wide range of electrical applications such as motor loads, heater control, power switching, lighting control, and more. It is easy to install and provides reliable performance in all operating conditions.

The specific data is subject to PDF, and the above content is for reference