8L41-12-111

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Reed relays are devices comprised of a small magnet coil and an enclosed, cylindrical reed contact that is actuated by the current flowing through the coil. The 8L41-12-111 reed relay is no different, and is often used for remote switching applications and for electrical isolation.

The primary function of the 8L41-12-111 reed relay is to provide a low loss, low resistance connection between two points (normally open) when the magnet coil is energised. If the coil remains energised, the contact remains closed; when the coil is switched off, the contact opens again. This makes them ideal for controlling circuits in high voltage and other environments where electrical isolation is required.

The 8L41-12-111 reed relay is especially suited for applications such as capacitance, resistance and inductance measurements, signal amplification, and alarm systems. It is also used in applications where low power and precision signal control are required, such as medical instruments and control systems. The 8L41-12-111 has a rated voltage of 1.2V and can withstand up to 100V DC. In addition, it has a contact rating of 0.2A/24V AC or DC and 1A/100V AC or DC, so it can be used for switching current or voltage in a wide range of applications.

The 8L41-12-111 reed relay is typically employed in a variety of circuits such as HVAC systems, telecom and data systems, military systems, automotive systems, medical equipment, and factory automation. In terms of operation, it acts as an electronic switch or switch/sensor hybrid. When activated, it closes the contact and allows current or voltage to flow. When deactivated, the contact opens and shuts off the flow.

The working principle behind the 8L41-12-111 reed relay is fairly straightforward and is similar to most other reed relays. When a current is passed through the relay’s magnet coil, it creates a magnetic field which powers the enclosed reed contact and causes it to close. The contact then allows current or voltage to flow through the circuit. When the current is removed, the magnetic field dissipates and the reed contact opens, thus deactivating the circuit.

In conclusion, the 8L41-12-111 reed relay is a commonly used device for remote switching applications and for electrical isolation. It acts as an electronic switch or switch/sensor hybrid and works by creating a magnetic field which powers the enclosed reed contact when current is passed through the coil. When the current is removed, the magnetic field dissipates and the reed contact opens, thus deactivating the circuit. This makes them ideal for controlling circuits in high voltage and other environments where electrical isolation is required.

The specific data is subject to PDF, and the above content is for reference