8N4SV76EC-0013CDI

Series:	FemtoClock® NG
Packaging:	Tray
Part Status:	Active
Type:	VCXO
Count:	--
Frequency:	622.08MHz
Voltage - Supply:	3.135 V ~ 3.465 V
Current - Supply:	140mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	6-CLCC
Supplier Device Package:	6-CLCC (7x5)
Mounting Type:	Surface Mount
Base Part Number:	IDT8N4SV76EC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 8N4SV76EC-0013CDI is a programmable, oscillator-driven clock device. The device combines the most popular features of both quartz and crystal-based oscillators to meet the most demanding timing needs for a variety of applications. It features an oscillator-based architecture and provides higher resolution, accuracy and stability than traditional quartz-based systems. The 8N4SV76EC-0013CDI is ideal for applications requiring high resolution operation, low power consumption and extremely low jitter.

Applications

The 8N4SV76EC-0013CDI can be used in a variety of applications, such as cell phone towers, network servers, wireless access points and communication protocols. Other applications include consumer products, medical equipment, automation systems and embedded systems. The 8N4SV76EC-0013CDI is also used in consumer electronics and industrial applications where exact synchronization is required or for power efficiency or emissions optimization.

Features

8N4SV76EC-0013CDI comes in a wide range of frequency selections from 10 MHz to 6 GHz. It offers a wide operating temperature range from -40°C to 85°C and a voltage range from 1.8V to 5V. The device features a small package size of 10mm x 8.5mm and is capable of powering down to 1uW. It also features a high resolution of up to 16MHz, a wide dynamic frequency adjustment range and a low jitter output.

Working Principle

The 8N4SV76EC-0013CDI works by using an oscillator-based timing core to produce accurate, jitter-free clock signals with extremely low power consumption. The oscillator is driven by an external crystal or precision reference clock. The clock output is calibrated to the reference clock to provide an adjustable frequency output. The device is then programmed using an on-board control programming interface to set the frequency and other parameters such as output duty cycle and power-down modes.The 8N4SV76EC-0013CDI integrates a low-noise voltage controlled oscillator (VCO) core, tuning information circuit and control logic, as well as a low-noise clock buffer output. The VCO core is driven by the external signal and provides a wide frequency range and low jitter output. The control logic receives the external signal and tunes the VCO core for accurate timing. The clock buffer then amplifies the output signal and provides a clean, low noise clock signal to external components.

Conclusion

The 8N4SV76EC-0013CDI is a highly programmable, low power consumption and low jitter oscillator-driven clock device. It is ideal for applications requiring exact synchronization, small package size, wide operating temperature range, wide frequency selection and low power consumption. The device is capable of powering down to 1uW and can be programmed to set the output frequency, duty cycle and various power-down modes. Additionally, the 8N4SV76EC-0013CDI provides a wide range of frequency selections, a high resolution of up to 16MHz, a wide dynamic frequency adjustment range and a low jitter output. This makes it an excellent choice for a variety of timing needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description